首頁 探索 說明
註冊 登入
rita
/
CoffeeProject_backup1229
1
0
複刻 0
Files 問題管理 0 Wiki
分支: master
分支列表 標籤列表
CoffeeProjec...
/
dry_block.html

dry_block.html 50 KB
永久連結 文件歷史 原始文件

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835 
  1. <!DOCTYPE html>
    2. 

  2. <html lang="en">
    3. 

  3. 

  4. <head>
    5. 

  5.     <meta charset="UTF-8">
    6. 

  6.     <title>{{ title }}</title>
    7. 

  7.     <meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no">
    8. 

  8. 

  9.     <!-- 新 Bootstrap4 核心 CSS 文件 -->
    10. 

  10.     <link rel="stylesheet" href="https://cdn.bootcss.com/bootstrap/4.1.0/css/bootstrap.min.css">
    11. 

  11.     <!-- jQuery文件。务必在bootstrap.min.js 之前引入 -->
    12. 

  12.     <script src="https://cdn.bootcss.com/jquery/3.2.1/jquery.min.js"></script>
    13. 

  13.     <!-- popper.min.js 用于弹窗、提示、下拉菜单 -->
    14. 

  14.     <script src="https://cdn.bootcss.com/popper.js/1.12.5/umd/popper.min.js"></script>
    15. 

  15.     <!-- 最新的 Bootstrap4 核心 JavaScript 文件 -->
    16. 

  16.     <script src="https://cdn.bootcss.com/bootstrap/4.1.0/js/bootstrap.min.js"></script>
    17. 

  17.     <!--可用來建立使用者小圖示-->
    18. 

  18.     <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/4.7.0/css/font-awesome.min.css">
    19. 

  19.     <script language="JavaScript">
    20. 

  20.         // 指定 秒 刷新網頁一次
    21. 

  21.         var dtn = '{{tid}}';
    22. 

  22.         var status = '{{status}}';
    23. 

  23.         console.log('dtn:' + dtn)
    24. 

  24. 

  25.         $(function(){
    26. 

  26.             $("#coffee_title_pc").text("乾燥槽積木程式介面");
    27. 

  27.             $("#coffee_title_phone").text("乾燥槽積木");
    28. 

  28. 

  29.             if (status == 2) {
    30. 

  30.                 $('input').prop('disabled', true);
    31. 

  31.                 $('button').prop('disabled', true);
    32. 

  32.             } else if ( (status == 0) || (status == 1) ) {
    33. 

  33.                 $('input').prop('disabled', false);
    34. 

  34.                 $('button').prop('disabled', false);   
    35. 

  35.             }
    36. 

  36.         });
    37. 

  37.     </script>
    38. 

  38. 

  39.     <style>
    40. 

  40.         .newcondition_css {
    41. 

  41.             padding: 10px;
    42. 

  42.             margin-top: 10px;
    43. 

  43.             background-color:honeydew;
    44. 

  44.         }
    45. 

  45.         hr {
    46. 

  46.             margin-top: 5px;
    47. 

  47.             margin-bottom: 5px;
    48. 

  48.         }
    49. 

  49.         .input-cond-delete {
    50. 

  50.             background: #E43030;
    51. 

  51.             border: 1px solid #CFCFCF;
    52. 

  52.             box-sizing: border-box;
    53. 

  53.             border-radius: 5px;
    54. 

  54.             margin-left: 5px;
    55. 

  55.             width: 65px;
    56. 

  56.             height: 33px;
    57. 

  57.             font-size: 16px;
    58. 

  58.             text-align: center;
    59. 

  59.             line-height: 16px;
    60. 

  60.             color: #FFFFFF;
    61. 

  61.         }
    62. 

  62.         .input-cond-add {
    63. 

  63.             background: #008CBA;
    64. 

  64.             border: 1px solid #CFCFCF;
    65. 

  65.             box-sizing: border-box;
    66. 

  66.             border-radius: 5px;
    67. 

  67.             margin-left: 5px;
    68. 

  68.             width: 65px;
    69. 

  69.             height: 33px;
    70. 

  70.             font-size: 16px;
    71. 

  71.             text-align: center;
    72. 

  72.             line-height: 16px;
    73. 

  73.             color: #FFFFFF;
    74. 

  74.         }
    75. 

  75.         .input-act-add {
    76. 

  76.             background: #008CBA;
    77. 

  77.             border: 1px solid #CFCFCF;
    78. 

  78.             box-sizing: border-box;
    79. 

  79.             border-radius: 5px;
    80. 

  80.             margin-left: 5px;
    81. 

  81.             width: 100px;
    82. 

  82.             height: 33px;
    83. 

  83.             font-size: 16px;
    84. 

  84.             text-align: center;
    85. 

  85.             line-height: 16px;
    86. 

  86.             color: #FFFFFF;
    87. 

  87.         }
    88. 

  88.         .input-act-delete {
    89. 

  89.             background: #E43030;
    90. 

  90.             border: 1px solid #CFCFCF;
    91. 

  91.             box-sizing: border-box;
    92. 

  92.             border-radius: 5px;
    93. 

  93.             margin-left: 5px;
    94. 

  94.             width: 100px;
    95. 

  95.             height: 33px;
    96. 

  96.             font-size: 16px;
    97. 

  97.             text-align: center;
    98. 

  98.             line-height: 16px;
    99. 

  99.             color: #FFFFFF;
    100. 

  100.         }
    101. 

  101.         .input-add {
    102. 

  102.             background: #008CBA;
    103. 

  103.             border: 1px solid #CFCFCF;
    104. 

  104.             box-sizing: border-box;
    105. 

  105.             border-radius: 5px;
    106. 

  106.             margin-left: 5px;
    107. 

  107.             margin-top: 5px;
    108. 

  108.             width: 150px;
    109. 

  109.             height: 40px;
    110. 

  110.             font-size: 18px;
    111. 

  111.             text-align: center;
    112. 

  112.             line-height: 16px;
    113. 

  113.             color: #FFFFFF;
    114. 

  114.         }
    115. 

  115.         .input-delete {
    116. 

  116.             background: #E43030;
    117. 

  117.             border: 1px solid #CFCFCF;
    118. 

  118.             box-sizing: border-box;
    119. 

  119.             border-radius: 5px;
    120. 

  120.             margin-left: 5px;
    121. 

  121.             margin-top: 5px;
    122. 

  122.             width: 150px;
    123. 

  123.             height: 40px;
    124. 

  124.             font-size: 18px;
    125. 

  125.             text-align: center;
    126. 

  126.             line-height: 16px;
    127. 

  127.             color: #FFFFFF;
    128. 

  128.         }
    129. 

  129.         select {
    130. 

  130.             font-size: 24px;
    131. 

  131.             height: 30px;
    132. 

  132.             padding: 2px 5px;
    133. 

  133.             margin-left: 5px;
    134. 

  134.         }
    135. 

  135. 

  136.     </style>
    137. 

  137. 

  138. </head>
    139. 

  139. 

  140. <body style="font-size: 18px;">
    141. 

  141.     <div id="wrapper">
    142. 

  142.         <div id="coffee_header">
    143. 

  143.             <!-- 匯入共同使用的 header.html 內容 -->
    144. 

  144.             {% include 'header.html' %}
    145. 

  145.         </div>
    146. 

  146.         <!-- [物件]文字輸入框 選擇後連結 [動作]文字輸入框 -->
    147. 

  147.         <script>
    148. 

  148.             dry_object = new Array();
    149. 

  149.             dry_object[0] = ["-"];  // 制動器 / 感測器
    150. 

  150.             dry_object[1] = ["on", "off"];  // 入料真空吸料機
    151. 

  151.             dry_object[2] = ["on", "off"];  // 真空吸料機
    152. 

  152.             dry_object[3] = ["ON 吸料", "OFF 排氣"];  // 入料三通閥
    153. 

  153.             dry_object[4] = ["0", "10", "20", "30", "40", "50"];  // 馬達
    154. 

  154.             dry_object[5] = ["on", "off"];  // 鼓風機
    155. 

  155.             dry_object[6] = ["on", "off"];  // 加熱器 1
    156. 

  156.             dry_object[7] = ["on", "off"];  // 加熱器 2
    157. 

  157.             dry_object[8] = ["on", "off"];  // 蝴蝶閥
    158. 

  158.             dry_object[9] = ["on", "off"];  // 消毒電磁閥
    159. 

  159.             dry_object[10] = ["on", "off"];  // 排水電磁閥
    160. 

  160.             dry_object[11] = ["on", "off"];  // 夾層進水電磁閥
    161. 

  161.             dry_object[12] = ["on", "off"];  // 溫控開關
    162. 

  162.             dry_object[13] = ["0.0", "28.0", "30.0", "32.0", "34.0", "36.0", "38.0", "40.0", "42.0", "44.0", "46.0", "48.0", "50.0"];  // 設定溫度
    163. 

  163.             dry_object[14] = ["on", "off"];  // 出料真空吸料機
    164. 

  164. 

  165.             dry_object[15] = ["1", "5", "10", "30", "60"];  // 暫停秒數
    166. 

  166. 

  167.             dry_object[16] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 入料儲豆槽_液位計
    168. 

  168.             dry_object[17] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 液位計
    169. 

  169.             dry_object[18] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // SHT11_溫度
    170. 

  170.             dry_object[19] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // SHT11_濕度
    171. 

  171.             dry_object[20] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 土壤三合一_溫度
    172. 

  172.             dry_object[21] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 土壤三合一_濕度
    173. 

  173.             dry_object[22] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 土壤三合一_EC
    174. 

  174.             dry_object[23] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 氣壓
    175. 

  175.             dry_object[24] = ["off", "1s", "5s", "10s", "30s", "1min", "5min", "10min", "30min", "1hr", "2hr"];  // 出料儲豆槽_液位計
    176. 

  176. 

  177.             function renew(obj_num, index) {
    178. 

  178.                 var Value="";
    179. 

  179.                 for(var i=0; i<dry_object[index].length; i++){
    180. 

  180.                     Value = Value + '<option value=' + dry_object[index][i] + '> ' + dry_object[index][i] + '</option>';
    181. 

  181.                 }
    182. 

  182.                 var sectorSelect = document.getElementById("do_act" + obj_num);
    183. 

  183.                 // console.log("sectorSelect: " + sectorSelect)
    184. 

  184.                 sectorSelect.innerHTML = Value;
    185. 

  185.             }
    186. 

  186. 

  187.         </script>
    188. 

  188.         
    189. 

  189.         <div id="box">
    190. 

  190.             <div id="newcondition_1" class="newcondition_css">
    191. 

  191.                 <!-- 總 條件 -->
    192. 

  192.                 <div id="condition1">
    193. 

  193.                     <!-- 子條件 1_1-->
    194. 

  194.                     <div id="condition1_1">
    195. 

  195.                         條件
    196. 

  196.                         <select id="cond_z1_1">
    197. 

  197.                             <option value="if">if</option>
    198. 

  198.                             <option value="while">while</option>
    199. 

  199.                         </select>
    200. 

  200.                         <select id="cond_tank1_1">
    201. 

  201.                             <option value="D1">乾燥桶 D1</option>
    202. 

  202.                             <option value="D2">乾燥桶 D2</option>
    203. 

  203.                             <option value="D3">乾燥桶 D3</option>
    204. 

  204.                             <option value="D4">乾燥桶 D4</option>
    205. 

  205.                             <option value="D5">乾燥桶 D5</option>
    206. 

  206.                             <option value="D6">乾燥桶 D6</option>
    207. 

  207.                             <option value="D7">乾燥桶 D7</option>
    208. 

  208.                             <option value="D8">乾燥桶 D8</option>
    209. 

  209.                             <option value="D9">乾燥桶 D9</option>
    210. 

  210.                             <option value="D10">乾燥桶 D10</option>
    211. 

  211.                             <option value="D11">乾燥桶 D11</option>
    212. 

  212.                             <option value="D12">乾燥桶 D12</option>
    213. 

  213.                         </select>
    214. 

  214.                         <select id="cond_a1_1">
    215. 

  215.                             <option value="">制動器 / 感測器</option>
    216. 

  216.                             <optgroup label="制動器">
    217. 

  217.                                 <option value="input_vacuum_status">入料真空吸料機</option>
    218. 

  218.                                 <option value="tank_vacuum_status">真空吸料機</option>
    219. 

  219.                                 <option value="tank_threewayvalve_input_status">入料三通閥</option>
    220. 

  220.                                 <option value="tank_motor_status">馬達</option>
    221. 

  221.                                 <option value="tank_blower_status">鼓風機</option>
    222. 

  222.                                 <option value="tank_heater1_status">加熱器 1</option>
    223. 

  223.                                 <option value="tank_heater2_status">加熱器 2</option>
    224. 

  224.                                 <option value="tank_diskvalve_status">蝴蝶閥</option>
    225. 

  225.                                 <option value="tank_solenoid_disinfect_status">消毒電磁閥</option>
    226. 

  226.                                 <option value="tank_solenoid_water_out_status">排水電磁閥</option>
    227. 

  227.                                 <option value="outer_solenoid_water_status">夾層進水電磁閥</option>
    228. 

  228.                                 <option value="tank_temp_enable">溫控開關</option>
    229. 

  229.                                 <option value="tank_temp">設定溫度</option>
    230. 

  230.                                 <option value="output_vacuum">出料真空吸料機</option>
    231. 

  231.                             </optgroup>
    232. 

  232.                             <optgroup label="感測器數值">
    233. 

  233.                                 <option value="input_UltraSonic">入料儲豆槽_液位計(cm)</option>
    234. 

  234.                                 <option value="tank_UltraSonic">液位計(cm)</option>
    235. 

  235.                                 <option value="tank_SHT11_Temp">SHT11_溫度(℃)</option>
    236. 

  236.                                 <option value="tank_SHT11_Humidity">SHT11_濕度(%)</option>
    237. 

  237.                                 <option value="tank_soil_Temp">土壤三合一_溫度(℃)</option>
    238. 

  238.                                 <option value="tank_soil_Humidity">土壤三合一_濕度(%)</option>
    239. 

  239.                                 <option value="tank_soil_EC">土壤三合一_EC(%)</option>
    240. 

  240.                                 <option value="tank_PA">氣壓(PA)</option>
    241. 

  241.                                 <option value="output_UltraSonic">出料儲豆槽_液位計(cm)</option>
    242. 

  242.                             </optgroup>
    243. 

  243.                         </select>
    244. 

  244.                         <select id="cond_b1_1">
    245. 

  245.                             <option value="equal">==</option>
    246. 

  246.                             <option value="morethan">&gt;=</option>
    247. 

  247.                             <option value="lessthan">&lt;=</option>
    248. 

  248.                         </select>
    249. 

  249.                         <input list="cond_list_c1_1" id="cond_c1_1">
    250. 

  250.                         <datalist id="cond_list_c1_1">
    251. 

  251.                             <option value="on">
    252. 

  252.                             <option value="off">
    253. 

  253.                             <option value="(或請自行輸入數值)">
    254. 

  254.                         </datalist>
    255. 

  255.                         <input type="button" class="input-cond-add" id="cond_add1_1" value="條件++" onclick="cond_add(cond_add1_1);"><br>
    256. 

  256.                         <script>
    257. 

  257.                             var cond_add_child_i = 1                                                // 這是子條件
    258. 

  258. 

  259.                             function cond_add(evt) {                                                // cond_add1_1 下一個是 cond_add1(條件)_2(子條件)
    260. 

  260.                                 evt.style.display = "none";                                         // 不顯示原按鈕
    261. 

  261.                                 var condadd_parent_num = String(evt.id).split('_')[1].slice(3, )    // 把第一個條件的編號記下
    262. 

  262.                                 // console.log("condadd_parent_num: " + condadd_parent_num)
    263. 

  263. 

  264.                                 cond_add_child_i++
    265. 

  265. 

  266.                                 var html = '';
    267. 

  267.                                 html +=
    268. 

  268.                                 '<div id="condition' + condadd_parent_num + '_' + cond_add_child_i + '">' +
    269. 

  269.                                 '<select id="cond_d' + condadd_parent_num + '_' + cond_add_child_i + '">' + 
    270. 

  270.                                 '<option value="and">and</option>' + 
    271. 

  271.                                 '<option value="or">or</option>' + 
    272. 

  272.                                 '</select> ' + 
    273. 

  273.                                 '<select id="cond_a' + condadd_parent_num + '_' + cond_add_child_i + '">' + 
    274. 

  274.                                 '<option value="">制動器 / 感測器</option>' +
    275. 

  275.                                 '<optgroup label="制動器">' +
    276. 

  276.                                 '<option value="input_vacuum_status">入料真空吸料機</option>' +
    277. 

  277.                                 '<option value="tank_vacuum_status">真空吸料機</option>' +
    278. 

  278.                                 '<option value="tank_threewayvalve_input_status">入料三通閥</option>' +
    279. 

  279.                                 '<option value="tank_motor_status">馬達</option>' +
    280. 

  280.                                 '<option value="tank_blower_status">鼓風機</option>' +
    281. 

  281.                                 '<option value="tank_heater1_status">加熱器 1</option>' +
    282. 

  282.                                 '<option value="tank_heater2_status">加熱器 2</option>' +
    283. 

  283.                                 '<option value="tank_diskvalve_status">蝴蝶閥</option>' +
    284. 

  284.                                 '<option value="tank_solenoid_disinfect_status">消毒電磁閥</option>' +
    285. 

  285.                                 '<option value="tank_solenoid_water_out_status">排水電磁閥</option>' +
    286. 

  286.                                 '<option value="outer_solenoid_water_status">夾層進水電磁閥</option>' +
    287. 

  287.                                 '<option value="tank_temp_enable">溫控開關</option>' +
    288. 

  288.                                 '<option value="tank_temp">設定溫度</option>' +
    289. 

  289.                                 '<option value="output_vacuum_status">出料真空吸料機</option>' +
    290. 

  290.                                 '</optgroup>' +
    291. 

  291.                                 '<optgroup label="感測器數值">' +
    292. 

  292.                                 '<option value="input_UltraSonic">入料儲豆槽_液位計(cm)</option>' +
    293. 

  293.                                 '<option value="tank_UltraSonic">液位計(cm)</option>' +
    294. 

  294.                                 '<option value="tank_SHT11_Temp">SHT11_溫度(℃)</option>' +
    295. 

  295.                                 '<option value="tank_SHT11_Humidity">SHT11_濕度(%)</option>' +
    296. 

  296.                                 '<option value="tank_soil_Temp">土壤三合一_溫度(℃)</option>' +
    297. 

  297.                                 '<option value="tank_soil_Humidity">土壤三合一_濕度(%)</option>' +
    298. 

  298.                                 '<option value="tank_soil_EC">土壤三合一_EC(%)</option>' +
    299. 

  299.                                 '<option value="tank_PA">氣壓(PA)</option>' +
    300. 

  300.                                 '<option value="output_UltraSonic">出料儲豆槽_液位計(cm)</option>' +
    301. 

  301.                                 '</optgroup>' +
    302. 

  302.                                 '</select> ' + 
    303. 

  303.                                 '<select id="cond_b' + condadd_parent_num + '_' + cond_add_child_i + '">' + 
    304. 

  304.                                 '<option value="equal">==</option>' +
    305. 

  305.                                 '<option value="morethan">&gt;=</option>' +
    306. 

  306.                                 '<option value="lessthan">&lt;=</option>' +
    307. 

  307.                                 '</select> ' +
    308. 

  308.                                 '<input list="cond_list_c' + condadd_parent_num + '_' + cond_add_child_i + '" id="cond_c' + condadd_parent_num + '_' + cond_add_child_i + '">' + 
    309. 

  309.                                 '<datalist id="cond_list_c' + condadd_parent_num + '_' + cond_add_child_i + '">' +
    310. 

  310.                                 '<option value="on">' +
    311. 

  311.                                 '<option value="off">' +
    312. 

  312.                                 '<option value="(或請自行輸入數值)">' +
    313. 

  313.                                 '</datalist> ' +
    314. 

  314.                                 '<input type="button" class="input-cond-delete" id="cond_del' + condadd_parent_num + '_' + cond_add_child_i + '" value="條件--" onclick="cond_del(\'' + condadd_parent_num + '_' + cond_add_child_i + '\');">' +
    315. 

  315.                                 '<input type="button" class="input-cond-add" id="cond_add' + condadd_parent_num + '_' + cond_add_child_i + '" value="條件++" onclick="cond_add(cond_add' + condadd_parent_num + '_' + cond_add_child_i + ');"><br>' +
    316. 

  316.                                 '</div>';
    317. 

  317. 

  318.                                 var divbox = document.getElementById('condition' + condadd_parent_num);
    319. 

  319.                                 divbox.insertAdjacentHTML('beforeend', html);
    320. 

  320.                             }
    321. 

  321. 

  322.                             function cond_del(evt) {
    323. 

  323.                                 // console.log('evt: ' + evt)
    324. 

  324.                                 var del_cond_child = document.getElementById('condition' + evt);
    325. 

  325.                                 // console.log("del_cond_child: " + del_cond_child)
    326. 

  326.                                 del_cond_child.innerHTML = ""
    327. 

  327. 

  328.                                 var parentObj = del_cond_child.parentNode;       // 取得欲刪除 div 的父類別
    329. 

  329.                                 parentObj.removeChild(del_cond_child)            // 刪除 div
    330. 

  330. 

  331.                                 // 上一個按鈕要顯示出來
    332. 

  332.                                 var del_cond_parent_num = String(evt).split('_')[0]
    333. 

  333.                                 var del_cond_child_num = String(evt).split('_')[1]
    334. 

  334.                                 // console.log('del_cond_parent_num: ' + del_cond_parent_num)
    335. 

  335.                                 // console.log('del_cond_child_num: ' + del_cond_child_num)
    336. 

  336.                                 var button_return_id = document.getElementById('cond_add' + del_cond_parent_num + '_' + String(parseInt(del_cond_child_num)-1));
    337. 

  337.                                 // console.log("test: " + 'cond_add' + del_cond_parent_num + '_' + String(parseInt(del_cond_child_num)-1))
    338. 

  338.                                 // console.log("button_return_id: " + button_return_id)    // null
    339. 

  339.                                 if (button_return_id == null) {
    340. 

  340.                                     var button_return_id = document.getElementById('cond_add' + del_cond_parent_num + '_1');
    341. 

  341.                                 }
    342. 

  342.                                 button_return_id.style.display = "inline";
    343. 

  343.                             }
    344. 

  344.                         </script>
    345. 

  345. 

  346.                     </div>
    347. 

  347.                 </div>
    348. 

  348. 

  349.                 <div id="action1">
    350. 

  350.                     <div id="action1_1">
    351. 

  351.                         物件
    352. 

  352.                         <select id="do_obj1_1" onChange="renew('1_1', this.selectedIndex);">
    353. 

  353.                             <option value="">制動器 / 感測器</option>
    354. 

  354.                             <optgroup label="制動器">
    355. 

  355.                                 <option value="input_vacuum_status">入料真空吸料機</option>
    356. 

  356.                                 <option value="tank_vacuum_status">真空吸料機</option>
    357. 

  357.                                 <option value="tank_threewayvalve_input_status">入料三通閥</option>
    358. 

  358.                                 <option value="tank_motor_status">馬達</option>
    359. 

  359.                                 <option value="tank_blower_status">鼓風機</option>
    360. 

  360.                                 <option value="tank_heater1_status">加熱器 1</option>
    361. 

  361.                                 <option value="tank_heater2_status">加熱器 2</option>
    362. 

  362.                                 <option value="tank_diskvalve_status">蝴蝶閥</option>
    363. 

  363.                                 <option value="tank_solenoid_disinfect_status">消毒電磁閥</option>
    364. 

  364.                                 <option value="tank_solenoid_water_out_status">排水電磁閥</option>
    365. 

  365.                                 <option value="outer_solenoid_water_status">夾層進水電磁閥</option>
    366. 

  366.                                 <option value="tank_temp_enable">溫控開關</option>
    367. 

  367.                                 <option value="tank_temp">設定溫度</option>
    368. 

  368.                                 <option value="output_vacuum">出料真空吸料機</option>
    369. 

  369.                                 <option value="time.sleep">暫停秒數</option>
    370. 

  370.                             </optgroup>
    371. 

  371.                             <optgroup label="感測器回傳值頻率">
    372. 

  372.                                 <option value="input_ultrasonic_status">入料儲豆槽_液位計(cm)</option>
    373. 

  373.                                 <option value="tank_ultrasonic_status">液位計(cm)</option>
    374. 

  374.                                 <option value="tank_sht11_temp_status">SHT11_溫度(℃)</option>
    375. 

  375.                                 <option value="tank_sht11_humidity_status">SHT11_濕度(%)</option>
    376. 

  376.                                 <option value="tank_soil_temp_status">土壤三合一_溫度(℃)</option>
    377. 

  377.                                 <option value="tank_soil_humidity_status">土壤三合一_濕度(%)</option>
    378. 

  378.                                 <option value="tank_soil_ec_status">土壤三合一_EC(%)</option>
    379. 

  379.                                 <option value="tank_pa_status">氣壓(PA)</option>
    380. 

  380.                                 <option value="output_ultrasonic_status">出料儲豆槽_液位計(cm)</option>
    381. 

  381.                             </optgroup>
    382. 

  382.                         </select>
    383. 

  383.                         動作
    384. 

  384.                         <select id="do_act1_1">
    385. 

  385.                             <option value="">請由左方選取物件
    386. 

  386.                         </select>
    387. 

  387.                         <input type="button" class="input-act-add" id="act_add1_1" value="物件動作++" onclick="act_add(act_add1_1);"><br>
    388. 

  388.                     
    389. 

  389.                     </div>
    390. 

  390. 

  391.                     <script>
    392. 

  392.                         var act_add_child_i = 1
    393. 

  393.                         function act_add(evt) {
    394. 

  394.                             evt.style.display = "none";
    395. 

  395.                             var actadd_parent_num = String(evt.id).split('_')[1].slice(3, )
    396. 

  396.                             // console.log("actadd_parent_num: " + actadd_parent_num)
    397. 

  397. 

  398.                             act_add_child_i++;
    399. 

  399. 

  400.                             var html = '';
    401. 

  401.                             html +=
    402. 

  402.                             '<div id="action' + actadd_parent_num + '_' + act_add_child_i + '">' +
    403. 

  403.                             '物件 ' +
    404. 

  404.                             '<select id="do_obj' + actadd_parent_num + '_' + act_add_child_i + '" onChange="renew(\'' + actadd_parent_num + '_' + act_add_child_i + '\', this.selectedIndex);">' +
    405. 

  405.                             '<option value="">制動器 / 感測器</option>' +
    406. 

  406.                             '<optgroup label="制動器">' +
    407. 

  407.                             '<option value="input_vacuum_status">入料真空吸料機</option>' +
    408. 

  408.                             '<option value="tank_vacuum_status">真空吸料機</option>' +
    409. 

  409.                             '<option value="tank_threewayvalve_input_status">入料三通閥</option>' +
    410. 

  410.                             '<option value="tank_motor_status">馬達</option>' +
    411. 

  411.                             '<option value="tank_blower_status">鼓風機</option>' +
    412. 

  412.                             '<option value="tank_heater1_status">加熱器 1</option>' +
    413. 

  413.                             '<option value="tank_heater2_status">加熱器 2</option>' +
    414. 

  414.                             '<option value="tank_diskvalve_status">蝴蝶閥</option>' +
    415. 

  415.                             '<option value="tank_solenoid_disinfect_status">消毒電磁閥</option>' +
    416. 

  416.                             '<option value="tank_solenoid_water_out_status">排水電磁閥</option>' +
    417. 

  417.                             '<option value="outer_solenoid_water_status">夾層進水電磁閥</option>' +
    418. 

  418.                             '<option value="tank_temp_enable">溫控開關</option>' +
    419. 

  419.                             '<option value="tank_temp">設定溫度</option>' +
    420. 

  420.                             '<option value="output_vacuum">出料真空吸料機</option>' +
    421. 

  421.                             '<option value="time.sleep">暫停秒數</option>' +
    422. 

  422.                             '</optgroup>' +
    423. 

  423.                             '<optgroup label="感測器回傳值頻率">' +
    424. 

  424.                             '<option value="input_ultrasonic_status">入料儲豆槽_液位計(cm)</option>' +
    425. 

  425.                             '<option value="tank_ultrasonic_status">液位計(cm)</option>' +
    426. 

  426.                             '<option value="tank_sht11_temp_status">SHT11_溫度(℃)</option>' +
    427. 

  427.                             '<option value="tank_sht11_humidity_status">SHT11_濕度(%)</option>' +
    428. 

  428.                             '<option value="tank_soil_temp_status">土壤三合一_溫度(℃)</option>' +
    429. 

  429.                             '<option value="tank_soil_humidity_status">土壤三合一_濕度(%)</option>' +
    430. 

  430.                             '<option value="tank_soil_ec_status">土壤三合一_EC(%)</option>' +
    431. 

  431.                             '<option value="tank_pa_status">氣壓(PA)</option>' +
    432. 

  432.                             '<option value="output_ultrasonic_status">出料儲豆槽_液位計(cm)</option>' +
    433. 

  433.                             '</optgroup>' +
    434. 

  434.                             '</select> ' +
    435. 

  435.                             '動作 ' +
    436. 

  436.                             '<select id="do_act' + actadd_parent_num + '_' + act_add_child_i + '">' +
    437. 

  437.                             '<option value="">請由左方選取物件</option>' +
    438. 

  438.                             '</select> ' +
    439. 

  439.                             '<input type="button" class="input-act-delete" id="act_del' + actadd_parent_num + '_' + act_add_child_i + '" value="物件動作--" onclick="act_del(\'' + actadd_parent_num + '_' + act_add_child_i + '\');">' +
    440. 

  440.                             '<input type="button" class="input-act-add" id="act_add' + actadd_parent_num + '_' + act_add_child_i + '" value="物件動作++" onclick="act_add(act_add' + actadd_parent_num + '_' + act_add_child_i + ');"><br>' +
    441. 

  441.                             '</div>';
    442. 

  442. 

  443.                             var divbox = document.getElementById('action' + actadd_parent_num);
    444. 

  444.                             divbox.insertAdjacentHTML('beforeend', html);
    445. 

  445.                         }
    446. 

  446. 

  447.                         function act_del(evt) {
    448. 

  448.                             var del_action = document.getElementById('action' + evt);
    449. 

  449.                             del_action.innerHTML = ""
    450. 

  450. 

  451.                             var parentObj = del_action.parentNode;       // 取得欲刪除 div 的父類別
    452. 

  452.                             parentObj.removeChild(del_action)            // 刪除 div
    453. 

  453.                             
    454. 

  454.                             var del_act_parent_num = String(evt).split('_')[0]
    455. 

  455.                             var del_act_child_num = String(evt).split('_')[1]
    456. 

  456.                             // console.log('del_act_parent_num: ' + del_act_parent_num)
    457. 

  457.                             // console.log('del_act_child_num: ' + del_act_child_num)
    458. 

  458.                             var button_return_id = document.getElementById('act_add' + del_act_parent_num + '_' + String(parseInt(del_act_child_num)-1));
    459. 

  459.                             // console.log("test: " + 'cond_add' + del_act_parent_num + '_' + String(parseInt(del_act_child_num)-1))
    460. 

  460.                             // console.log("button_return_id: " + button_return_id)    // null
    461. 

  461.                             if (button_return_id == null) {
    462. 

  462.                                 var button_return_id = document.getElementById('act_add' + del_act_parent_num + '_1');
    463. 

  463.                             }
    464. 

  464.                             button_return_id.style.display = "inline";
    465. 

  465. 

  466.                         }
    467. 

  467.                     </script>
    468. 

  468. 

  469.                     
    470. 

  470.                 </div>
    471. 

  471. 

  472.                 <input type="button" class="input-add" id="add1" value="條件物件動作++" onclick="Add(add1);">
    473. 

  473.             </div>
    474. 

  474. 

  475.             <script>
    476. 

  476.                 var new_condition_i = 1
    477. 

  477. 

  478.                 function Add(evt) {                                 // 網頁初始按鈕 onclick="Add(add1);
    479. 

  479.                     evt.style.display = "none";                     // 元素不顯示。將 add1 的 input-button 不顯示
    480. 

  480.                     new_condition_i++;                                            // 設定編號用
    481. 

  481.                     // var div = document.createElement('div');        // 輸出 <div></div>。此時並不會顯示, 
    482. 

  482.                                                                     // 需透過 appendChild()、insertBefore() 或 replaceChild() 等方法將新元素加入至指定的位置之後才會顯示。
    483. 

  483.                     // var cond_number = String(evt).slice(3, )        // 目前的 condition 條件物件動作 數 (最外層)
    484. 

  484.                     // var cond_a = 'cond_a' + cond_number + '_' + new_condition_i;  // [條件] 左方 : 制動器感測器
    485. 

  485.                     // var cond_b = 'cond_b' + cond_number + '_' + new_condition_i;  // [條件] 中間 : > / = / < 
    486. 

  486.                     // var cond_c = 'cond_c' + cond_number + '_' + new_condition_i;  // [條件] 右方 : ON / OFF / 數值
    487. 

  487.                     // var cond_d = 'cond_d' + cond_number + '_' + new_condition_i;  // 條件] 最左方條件連接 : and / or
    488. 

  488.                     // div.id = 'newcondition_' + new_condition_i;                   // 設定 div 的 id
    489. 

  489.                     // div.style.marginTop = "10px";                   // 新增的 div 設定 marginTop 屬性值
    490. 

  490.                     var html = ''
    491. 

  491. 

  492.                     
    493. 

  493. 

  494.                     // 新增的條件
    495. 

  495.                     html += 
    496. 

  496.                     '<div id="newcondition_' + new_condition_i + '" class="newcondition_css">' +
    497. 

  497.                     
    498. 

  498.                     // 新增的分隔線
    499. 

  499.                     // '<hr size="50" width="100%">' +
    500. 

  500. 

  501. 

  502.                     '<div id="condition' + new_condition_i + '">' +
    503. 

  503.                     '<div id="condition' + new_condition_i + '_1">' +
    504. 

  504.                     '條件 ' +
    505. 

  505.                     '<select id="cond_z' + new_condition_i + '_1">' +
    506. 

  506.                     '<option value="if">if</option>' +
    507. 

  507.                     '<option value="while">while</option>' +
    508. 

  508.                     '</select> ' +
    509. 

  509.                     '<select id="cond_tank' + new_condition_i + '_1">' +
    510. 

  510.                     '<option value="D1">乾燥桶 D1</option>' +
    511. 

  511.                     '<option value="D2">乾燥桶 D2</option>' +
    512. 

  512.                     '<option value="D3">乾燥桶 D3</option>' +
    513. 

  513.                     '<option value="D4">乾燥桶 D4</option>' +
    514. 

  514.                     '<option value="D5">乾燥桶 D5</option>' +
    515. 

  515.                     '<option value="D6">乾燥桶 D6</option>' +
    516. 

  516.                     '<option value="D7">乾燥桶 D7</option>' +
    517. 

  517.                     '<option value="D8">乾燥桶 D8</option>' +
    518. 

  518.                     '<option value="D9">乾燥桶 D9</option>' +
    519. 

  519.                     '<option value="D10">乾燥桶 D10</option>' +
    520. 

  520.                     '<option value="D11">乾燥桶 D11</option>' +
    521. 

  521.                     '<option value="D12">乾燥桶 D12</option>' +
    522. 

  522.                     '</select> ' +
    523. 

  523.                     '<select id="cond_a' + new_condition_i + '_1">' +
    524. 

  524.                     '<option value="">制動器 / 感測器</option>' +
    525. 

  525.                     '<optgroup label="制動器">' +
    526. 

  526.                     '<option value="input_vacuum_status">入料真空吸料機</option>' +
    527. 

  527.                     '<option value="tank_vacuum_status">真空吸料機</option>' +
    528. 

  528.                     '<option value="tank_threewayvalve_input_status">入料三通閥</option>' +
    529. 

  529.                     '<option value="tank_motor_status">馬達</option>' +
    530. 

  530.                     '<option value="tank_blower_status">鼓風機</option>' +
    531. 

  531.                     '<option value="tank_heater1_status">加熱器 1</option>' +
    532. 

  532.                     '<option value="tank_heater2_status">加熱器 2</option>' +
    533. 

  533.                     '<option value="tank_diskvalve_status">蝴蝶閥</option>' +
    534. 

  534.                     '<option value="tank_solenoid_disinfect_status">消毒電磁閥</option>' +
    535. 

  535.                     '<option value="tank_solenoid_water_out_status">排水電磁閥</option>' +
    536. 

  536.                     '<option value="outer_solenoid_water_status">夾層進水電磁閥</option>' +
    537. 

  537.                     '<option value="tank_temp_enable">溫控開關</option>' +
    538. 

  538.                     '<option value="tank_temp">設定溫度</option>' +
    539. 

  539.                     '<option value="output_vacuum_status">出料真空吸料機</option>' +
    540. 

  540.                     '</optgroup>' +
    541. 

  541.                     '<optgroup label="感測器數值">' +
    542. 

  542.                     '<option value="input_UltraSonic">入料儲豆槽_液位計(cm)</option>' +
    543. 

  543.                     '<option value="tank_UltraSonic">液位計(cm)</option>' +
    544. 

  544.                     '<option value="tank_SHT11_Temp">SHT11_溫度(℃)</option>' +
    545. 

  545.                     '<option value="tank_SHT11_Humidity">SHT11_濕度(%)</option>' +
    546. 

  546.                     '<option value="tank_soil_Temp">土壤三合一_溫度(℃)</option>' +
    547. 

  547.                     '<option value="tank_soil_Humidity">土壤三合一_濕度(%)</option>' +
    548. 

  548.                     '<option value="tank_soil_EC">土壤三合一_EC(%)</option>' +
    549. 

  549.                     '<option value="tank_PA">氣壓(PA)</option>' +
    550. 

  550.                     '<option value="output_UltraSonic">出料儲豆槽_液位計(cm)</option>' +
    551. 

  551.                     '</optgroup>' +
    552. 

  552.                     '</select> ' +
    553. 

  553.                     '<select id="cond_b' + new_condition_i + '_1">' +
    554. 

  554.                     '<option value="equal">==</option>' +
    555. 

  555.                     '<option value="morethan">&gt;=</option>' +
    556. 

  556.                     '<option value="lessthan">&lt;=</option>' +
    557. 

  557.                     '</select> ' +
    558. 

  558.                     '<input list="cond_list_c' + new_condition_i + '_1" id="cond_c' + new_condition_i + '_1">' +
    559. 

  559.                     '<datalist id="cond_list_c' + new_condition_i + '_1">' +
    560. 

  560.                     '<option value="on">' +
    561. 

  561.                     '<option value="off">' +
    562. 

  562.                     '<option value="(或請自行輸入數值)">' +
    563. 

  563.                     '</datalist> ' +
    564. 

  564.                     '<input type="button" class="input-cond-add" id="cond_add' + new_condition_i + '_1" value="條件++" onclick="cond_add(cond_add' + new_condition_i + '_1)"><br>' +
    565. 

  565.                     '</div></div>';
    566. 

  566. 

  567.                     // 新增的物件動作
    568. 

  568.                     html +=
    569. 

  569.                     '<div id="action' + new_condition_i + '">' +
    570. 

  570.                     '<div id="action' + new_condition_i + '_1">' +
    571. 

  571.                     '物件 ' +
    572. 

  572.                     '<select id="do_obj' + new_condition_i + '_1" onChange="renew(\''+ new_condition_i + '_1\', this.selectedIndex);">' +
    573. 

  573.                     '<option value="">制動器 / 感測器</option>' +
    574. 

  574.                     '<optgroup label="制動器">' +
    575. 

  575.                     '<option value="input_vacuum_status">入料真空吸料機</option>' +
    576. 

  576.                     '<option value="tank_vacuum_status">真空吸料機</option>' +
    577. 

  577.                     '<option value="tank_threewayvalve_input_status">入料三通閥</option>' +
    578. 

  578.                     '<option value="tank_motor_status">馬達</option>' +
    579. 

  579.                     '<option value="tank_blower_status">鼓風機</option>' +
    580. 

  580.                     '<option value="tank_heater1_status">加熱器 1</option>' +
    581. 

  581.                     '<option value="tank_heater2_status">加熱器 2</option>' +
    582. 

  582.                     '<option value="tank_diskvalve_status">蝴蝶閥</option>' +
    583. 

  583.                     '<option value="tank_solenoid_disinfect_status">消毒電磁閥</option>' +
    584. 

  584.                     '<option value="tank_solenoid_water_out_status">排水電磁閥</option>' +
    585. 

  585.                     '<option value="outer_solenoid_water_status">夾層進水電磁閥</option>' +
    586. 

  586.                     '<option value="tank_temp_enable">溫控開關</option>' +
    587. 

  587.                     '<option value="tank_temp">設定溫度</option>' +
    588. 

  588.                     '<option value="output_vacuum">出料真空吸料機</option>' +
    589. 

  589.                     '<option value="time.sleep">暫停秒數</option>' +
    590. 

  590.                     '</optgroup>' +
    591. 

  591.                     '<optgroup label="感測器回傳值頻率">' +
    592. 

  592.                     '<option value="input_ultrasonic_status">入料儲豆槽_液位計(cm)</option>' +
    593. 

  593.                     '<option value="tank_ultrasonic_status">液位計(cm)</option>' +
    594. 

  594.                     '<option value="tank_sht11_temp_status">SHT11_溫度(℃)</option>' +
    595. 

  595.                     '<option value="tank_sht11_humidity_status">SHT11_濕度(%)</option>' +
    596. 

  596.                     '<option value="tank_soil_temp_status">土壤三合一_溫度(℃)</option>' +
    597. 

  597.                     '<option value="tank_soil_humidity_status">土壤三合一_濕度(%)</option>' +
    598. 

  598.                     '<option value="tank_soil_ec_status">土壤三合一_EC(%)</option>' +
    599. 

  599.                     '<option value="tank_pa_status">氣壓(PA)</option>' +
    600. 

  600.                     '<option value="output_ultrasonic_status">出料儲豆槽_液位計(cm)</option>' +
    601. 

  601.                     '</optgroup>' +
    602. 

  602.                     '</select>' +
    603. 

  603.                     ' 動作 ' +
    604. 

  604.                     '<select id="do_act' + new_condition_i + '_1">' +
    605. 

  605.                     '<option value="">請由左方選取物件' +
    606. 

  606.                     '</select> ' +
    607. 

  607.                     '<input type="button" class="input-act-add" id="act_add' + new_condition_i + '_1" value="物件動作++" onclick="act_add(act_add' + new_condition_i + '_1);"><br>' +
    608. 

  608.                     '</div>' +
    609. 

  609.                     '</div>' +
    610. 

  610. 

  611.                     // 新增的 條件物件動作++ 條件物件動作-- 按鈕
    612. 

  612.                     '<input type="button" class="input-delete" id="del' + new_condition_i + '" value="條件物件動作--" onclick="Delete(' + new_condition_i + ');"><br>' +
    613. 

  613.                     '<input type="button" class="input-add" id="add' + new_condition_i + '" value="條件物件動作++" onclick="Add(add' + new_condition_i + ');">' +
    614. 

  614.                     '</div>' ;
    615. 

  615. 

  616.                     var divbox = document.getElementById('box');
    617. 

  617.                     divbox.insertAdjacentHTML('beforeend', html);
    618. 

  618. 

  619.                 };
    620. 

  620.                 function Delete(evt) {
    621. 

  621.                     var del_condition = document.getElementById('newcondition_' + evt);
    622. 

  622.                     del_condition.innerHTML = ""
    623. 

  623. 

  624.                     var parentObj = del_condition.parentNode;       // 取得欲刪除 div 的父類別
    625. 

  625.                     parentObj.removeChild(del_condition)            // 刪除 div
    626. 

  626. 

  627.                     // 上一個按鈕要顯示出來
    628. 

  628.                     var button_return_id = document.getElementById('add' + String(parseInt(evt)-1));
    629. 

  629.                     if (button_return_id == null) {
    630. 

  630.                         var button_return_id = document.getElementById('add1');
    631. 

  631.                     }
    632. 

  632.                     // console.log('button_return_id: ' + button_return_id)
    633. 

  633.                     button_return_id.style.display = "block";        // 元素顯示。顯示前一個 input-button
    634. 

  634.                 };
    635. 

  635. 

  636.             </script>        
    637. 

  637. 

  638.             <!-- 新增加的 newcondition_(編號) 會加在這裡 -->
    639. 

  639. 

  640.         </div>
    641. 

  641.         - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    642. 

  642.         <br>
    643. 

  643. 

  644.         <input type="button" id="test" value="取值測試" onclick="test();"><br>
    645. 

  645.         <span id="value_test"> ( 取值測試 ) </span><br>
    646. 

  646.         <span id="command_test"> ( command 測試 ) </span><br>
    647. 

  647.         <input type="button" id="test" value="ajax 測試" onclick="AJAXtest();">
    648. 

  648. 

  649.         <script>
    650. 

  650.             var set_Schedule = '';
    651. 

  651. 

  652.             function test(){
    653. 

  653.                 // console.log("new_condition_i: " + new_condition_i)      // 總數 : 條件物件動作
    654. 

  654.                 // console.log("cond_add_child_i: " + cond_add_child_i)    // 總數 : 子 條件
    655. 

  655.                 // console.log("act_add_child_i: " + act_add_child_i)      // 總數 : 子 物件動作
    656. 

  656. 

  657.                 // set_Schedule += 'set_Schedule = { ';
    658. 

  658.                 set_Schedule = '{ ';
    659. 

  659. 

  660.                 var command_test = '';
    661. 

  661.                 // 條件物件動作 取值
    662. 

  662.                 for (let z = 1; z <= new_condition_i; z++) {
    663. 

  663.                     // if-while 取值
    664. 

  664.                     try {
    665. 

  665.                         var cond_z_value = document.getElementById("cond_z" + z + "_1").value;
    666. 

  666.                         // console.log("cond_z" + z + "_1: " + cond_z_value)
    667. 

  667.                         set_Schedule += '"cond_z' + z + '_1": "' + cond_z_value + '", ' ;
    668. 

  668.                     } catch (error) {
    669. 

  669.                         if (error.name == 'TypeError') {
    670. 

  670.                             console.log("cond_z" + z + "_1: null")
    671. 

  671.                         } else {
    672. 

  672.                             alert("cond_z" + z + "_1: " + error.name)
    673. 

  673.                             break
    674. 

  674.                         }
    675. 

  675.                     }
    676. 

  676. 

  677.                     // 桶槽號碼 取值
    678. 

  678.                     try {
    679. 

  679.                         var cond_tank_value = document.getElementById("cond_tank" + z + "_1").value;
    680. 

  680.                         // console.log("cond_tank" + z + "_1: " + cond_tank_value)
    681. 

  681.                         set_Schedule += '"cond_tank' + z + '_1": "' + cond_tank_value + '", ' ;
    682. 

  682.                     } catch (error) {
    683. 

  683.                         if (error.name == 'TypeError') {
    684. 

  684.                             console.log("cond_tank" + z + "_1: null")
    685. 

  685.                         } else {
    686. 

  686.                             alert("cond_tank" + z + "_1: " + error.name)
    687. 

  687.                             break
    688. 

  688.                         }
    689. 

  689.                     }
    690. 

  690. 

  691.                     // 子 條件 取值
    692. 

  692.                     for (let x = 1; x <= cond_add_child_i; x++) {
    693. 

  693.                         // 子條件取值 : 條件連接 and or
    694. 

  694.                         if (x > 1) {
    695. 

  695.                             try {
    696. 

  696.                                 var cond_d_value = document.getElementById("cond_d" + z + "_" + x).value;
    697. 

  697.                                 // console.log("cond_d" + z + "_" + x + ": " + cond_d_value)
    698. 

  698.                                 set_Schedule += '"cond_d' + z + '_' + x + '": "' + cond_d_value + '", ' ;
    699. 

  699.                             } catch (error) {
    700. 

  700.                                 if (error.name == 'TypeError') {
    701. 

  701.                                     // console.log("cond_d" + z + "_" + x + ": null")
    702. 

  702.                                 } else {
    703. 

  703.                                     alert("cond_d" + z + "_" + x + ": " + error.name)
    704. 

  704.                                     break
    705. 

  705.                                 }
    706. 

  706.                             }
    707. 

  707.                         }
    708. 

  708.                         try {
    709. 

  709.                             var cond_a_value = document.getElementById("cond_a" + z + "_" + x).value;
    710. 

  710.                             // console.log("cond_a" + z + "_" + x + ": " + cond_a_value)
    711. 

  711.                             set_Schedule += '"cond_a' + z + '_' + x + '": "' + cond_a_value + '", ' ;
    712. 

  712.                             if (cond_a_value == '') {
    713. 

  713.                                 alert('條件欄位輸入有誤, 請再次確認')
    714. 

  714.                                 break
    715. 

  715.                             }
    716. 

  716.                         } catch (error) {
    717. 

  717.                             if (error.name == 'TypeError') {
    718. 

  718.                                 // console.log("cond_a" + z + "_" + x + ": null")
    719. 

  719.                             } else {
    720. 

  720.                                 alert("cond_a" + z + "_" + x + ": " + error.name)
    721. 

  721.                                 break
    722. 

  722.                             }
    723. 

  723.                         }
    724. 

  724.                         // 子條件取值 : 條件中 > = <
    725. 

  725.                         try {
    726. 

  726.                             var cond_b_value = document.getElementById("cond_b" + z + "_" + x).value;
    727. 

  727.                             // console.log("cond_b" + z + "_" + x + ": " + cond_b_value)
    728. 

  728.                             set_Schedule += '"cond_b' + z + '_' + x + '": "' + cond_b_value + '", ' ;
    729. 

  729.                             if (cond_b_value == '') {
    730. 

  730.                                 alert('條件欄位輸入有誤, 請再次確認')
    731. 

  731.                                 break
    732. 

  732.                             }
    733. 

  733.                         } catch (error) {
    734. 

  734.                             if (error.name == 'TypeError') {
    735. 

  735.                                 // console.log("cond_b" + z + "_" + x + ": null")
    736. 

  736.                             } else {
    737. 

  737.                                 alert("cond_b" + z + "_" + x + ": " + error.name)
    738. 

  738.                                 break
    739. 

  739.                             }
    740. 

  740.                         }
    741. 

  741.                         // 子條件取值 : 條件右 ON / OFF / 輸入數值
    742. 

  742.                         try {
    743. 

  743.                             var cond_c_value = document.getElementById("cond_c" + z + "_" + x).value;
    744. 

  744.                             // console.log("cond_c" + z + "_" + x + ": " + cond_c_value)
    745. 

  745.                             set_Schedule += '"cond_c' + z + '_' + x + '": "' + cond_c_value + '", ' ;
    746. 

  746.                             if (cond_c_value == '') {
    747. 

  747.                                 alert('條件欄位輸入有誤, 請再次確認')
    748. 

  748.                                 break
    749. 

  749.                             }
    750. 

  750.                         } catch (error) {
    751. 

  751.                             if (error.name == 'TypeError') {
    752. 

  752.                                 // console.log("cond_c" + z + "_" + x + ": null")
    753. 

  753.                             } else {
    754. 

  754.                                 alert("cond_c" + z + "_" + x + ": " + error.name)
    755. 

  755.                                 break
    756. 

  756.                             }
    757. 

  757.                         }   
    758. 

  758.                     }
    759. 

  759. 

  760.                     // 子 物件動作 取值
    761. 

  761.                     for (let y = 1; y <= act_add_child_i; y++) {
    762. 

  762.                         // 子物件動作取值 : 物件 do_obj1_1
    763. 

  763.                         try {
    764. 

  764.                             var do_obj_value = document.getElementById("do_obj" + z + "_" + y).value;
    765. 

  765.                             if (do_obj_value == '') {
    766. 

  766.                                 alert('物件欄位輸入有誤, 請再次確認')
    767. 

  767.                                 break
    768. 

  768.                             }
    769. 

  769.                             // console.log("do_obj" + z + "_" + y + ": " + do_obj_value)
    770. 

  770.                             set_Schedule += '"do_obj' + z + '_' + y + '": "' + do_obj_value + '", ' ;
    771. 

  771.                             command_test += '{"tank_num": "' + cond_tank_value + '", "command": "' + do_obj_value + '", "value":"';
    772. 

  772.                         } catch (error) {
    773. 

  773.                             if (error.name == 'TypeError') {
    774. 

  774.                                 // console.log("do_obj" + z + "_" + y + ": null")
    775. 

  775.                             } else {
    776. 

  776.                                 alert("do_obj" + z + "_" + y + ": " + error.name)
    777. 

  777.                                 break
    778. 

  778.                             }
    779. 

  779.                         }
    780. 

  780.                         // 子物件動作取值 : 動作 do_act1_1
    781. 

  781.                         try {
    782. 

  782.                             var do_act_value = document.getElementById("do_act" + z + "_" + y).value;
    783. 

  783.                             if (do_act_value == '') {
    784. 

  784.                                 alert('動作欄位輸入有誤, 請再次確認')
    785. 

  785.                                 break
    786. 

  786.                             }
    787. 

  787.                             // console.log("do_act" + z + "_" + y + ": " + do_act_value)
    788. 

  788.                             set_Schedule += '"do_act' + z + '_' + y + '": "' + do_act_value + '", ' ;
    789. 

  789.                             command_test += do_act_value + '" }';
    790. 

  790.                         } catch (error) {
    791. 

  791.                             if (error.name == 'TypeError') {
    792. 

  792.                                 // console.log("do_obj" + z + "_" + y + ": null")
    793. 

  793.                             } else {
    794. 

  794.                                 alert("do_act" + z + "_" + y + ": " + error.name)
    795. 

  795.                                 break
    796. 

  796.                             }
    797. 

  797.                         }
    798. 

  798.                     }
    799. 

  799.                 }
    800. 

  800. 

  801.                 // 整理資料用
    802. 

  802.                 set_Schedule += '"": ""}' ;
    803. 

  803.                 // console.log('set_Schedule: ' + set_Schedule)
    804. 

  804.                 $('#value_test').text('set_Schedule: ' + set_Schedule)
    805. 

  805.                 $('#command_test').text('command_test: ' + command_test)
    806. 

  806.             }
    807. 

  807.         
    808. 

  808.             function AJAXtest(params) {
    809. 

  809.                 test();
    810. 

  810. 

  811.                 var schedule_data = {
    812. 

  812.                     "condition":new_condition_i,
    813. 

  813.                     "cond_add_child":cond_add_child_i,
    814. 

  814.                     "act_add_child":act_add_child_i,
    815. 

  815.                     "set_Schedule":set_Schedule
    816. 

  816.                 };
    817. 

  817. 

  818.                 $.get('/dry_block_set', schedule_data, function (res) {
    819. 

  819.                     // console.log("res.condition: " + res.condition)
    820. 

  820.                     // console.log("res.cond_add_child: " + res.cond_add_child)
    821. 

  821.                     // console.log("res.act_add_child: " + res.act_add_child)
    822. 

  822.                     console.log("res.response: " + res.response)
    823. 

  823.                 }, 'json');                
    824. 

  824.             }
    825. 

  825.         </script>
    826. 

  826. 

  827.         <div id="coffee_footer">
    828. 

  828.             <!-- 匯入共同使用的 footer.html 內容 -->
    829. 

  829.             {% include 'footer.html' %}
    830. 

  830.         </div>
    831. 

  831.     </div>
    832. 

  832. 

  833. </body>
    834. 

  834. 

  835. </html>
    836.