rita
/
CoffeeProject


			
							1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963
							<!DOCTYPE html>
<html lang="en">

<head>
    <meta charset="UTF-8">
    <title>{{ title }}</title>
    <meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no">
    <!-- <meta http-equiv="refresh" content="5" />  每 content 秒網頁自動更新-->

    <!-- 新 Bootstrap4 核心 CSS 文件 -->
    <link rel="stylesheet" href="https://cdn.bootcss.com/bootstrap/4.1.0/css/bootstrap.min.css">
    <!-- jQuery文件。务必在bootstrap.min.js 之前引入 -->
    <script src="https://cdn.bootcss.com/jquery/3.2.1/jquery.min.js"></script>
    <!-- popper.min.js 用于弹窗、提示、下拉菜单 -->
    <script src="https://cdn.bootcss.com/popper.js/1.12.5/umd/popper.min.js"></script>
    <!-- 最新的 Bootstrap4 核心 JavaScript 文件 -->
    <script src="https://cdn.bootcss.com/bootstrap/4.1.0/js/bootstrap.min.js"></script>
    <!--可用來建立使用者小圖示-->
    <link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/font-awesome/4.7.0/css/font-awesome.min.css">
    
    <script language="JavaScript">
        // 指定 秒 刷新網頁一次
        var ftn = '{{tid}}';
        var status = '{{status}}';

        $(function(){
            $("#coffee_title_pc").text('F' + ftn + ' 發酵槽操作介面');
            $("#coffee_title_phone").text('F' + ftn + ' 發酵槽操作介面');
            
            if (status == 2) {
                $('input').prop('disabled', true);
                $('button').prop('disabled', true);
            } else if ( (status == 0) || (status == 1) ) {
                $('input').prop('disabled', false);
                $('button').prop('disabled', false);   
            }
        });

        WebUpdate_set = setInterval(function(){WebUpdate(ftn)} , 10 * 1000)
    </script>

    <script>
        // 發酵槽_致動器控制
        var tank_num = '{{tid}}';

        function tankVacuum(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_vacuum_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_vacuum_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_vacuum_status]:checked");
                console.log('check：', check);
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-05").prop('checked', false);
                    if (!confirm("你確定要開啟真空吸料機嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-05").prop('checked', true);
                    if (!confirm("你確定要關閉真空吸料機嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_vacuum_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-05").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-05").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function tankThreeWayValveInput(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_threewayvalve_input_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_threewayvalve_input_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_threewayvalve_input_status]:checked");
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-08").prop('checked', false);
                    if (!confirm("你確定要開啟入料三通閥嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-08").prop('checked', true);
                    if (!confirm("你確定要關閉入料三通閥嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_threewayvalve_input_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-08").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-08").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }
        
        function tankDiskValve(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_diskvalve_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_diskvalve_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_diskvalve_status]:checked");
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-11").prop('checked', false);
                    if (!confirm("你確定要開啟蝴蝶閥嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-11").prop('checked', true);
                    if (!confirm("你確定要關閉蝴蝶閥嗎?")) {
                        return false;
                    };
                };

                var data = { "tank_num": "F" + tank_num, "command": "tank_diskvalve_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-11").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-11").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function tankSolenoidPump(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "solenoid_tank_pump_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "solenoid_tank_pump_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=solenoid_tank_pump_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-14").prop('checked', false);
                    if (!confirm("你確定要開啟水泵逆洗電磁閥嗎?")) {
                        return false;
                    };

                } else {
                    $("#cmn-toggle-14").prop('checked', true);
                    if (!confirm("你確定要關閉水泵逆洗電磁閥嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "solenoid_tank_pump_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-14").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-14").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }
        
        function tankSolenoidDisinfect(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_disinfect_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_disinfect_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_solenoid_disinfect_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-17").prop('checked', false);
                    if (!confirm("你確定要開啟消毒電磁閥嗎?")) {
                        return false;
                    };

                } else {
                    $("#cmn-toggle-17").prop('checked', true);
                    if (!confirm("你確定要關閉消毒電磁閥嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_disinfect_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-17").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-17").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function outerSolenoidWater(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "outer_solenoid_water_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "outer_solenoid_water_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=outer_solenoid_water_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-38").prop('checked', false);
                    if (!confirm("你確定要開啟\"桶外\"進水電磁閥嗎?")) {
                        return false;
                    };

                } else {
                    $("#cmn-toggle-38").prop('checked', true);
                    if (!confirm("你確定要關閉\"桶外\"進水電磁閥嗎?")) {
                        return false;
                    };
                };

                var data = { "tank_num": "F" + tank_num, "command": "outer_solenoid_water_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-38").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-38").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }
        
        function tankSolenoidWaterIn(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_water_in_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_water_in_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_solenoid_water_in_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-50").prop('checked', false);
                    if (!confirm("你確定要開啟\"桶內\"進水電磁閥嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-50").prop('checked', true);
                    if (!confirm("你確定要關閉\"桶內\"進水電磁閥嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_water_in_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-50").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-50").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function tankSolenoidWaterOut(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_water_out_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_water_out_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_solenoid_water_out_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-53").prop('checked', false);
                    if (!confirm("你確定要開啟\"桶內排水\"電磁閥嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-53").prop('checked', true);
                    if (!confirm("你確定要關閉\"桶內排水\"電磁閥嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_solenoid_water_out_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-53").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-53").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function tankPumpSensor(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_pump_sensor_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_pump_sensor_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_pump_sensor_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-41").prop('checked', false);
                    if (!confirm("你確定要開啟感測器用 pump 雙核隔膜泵嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-41").prop('checked', true);
                    if (!confirm("你確定要關閉感測器用 pump 雙核隔膜泵嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_pump_sensor_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-41").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-41").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function outerThreeWayValveFloat(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "outer_threewayvalve_float_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "outer_threewayvalve_float_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=outer_threewayvalve_float_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-47").prop('checked', false);
                    if (!confirm("你確定要開啟外桶浮選三通閥嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-47").prop('checked', true);
                    if (!confirm("你確定要關閉外桶浮選三通閥嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "outer_threewayvalve_float_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-47").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-47").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function tankMotor_set() {
            var motor_data = $("input[id=motor_rpm_data]").val();
            if (motor_data == '') {
                //$("#cmn-toggle-20").prop('checked', false);
                alert("請先輸入要運轉的值!");
                return false;
            } else if (motor_data == 0) {
                alert("轉速 0 為關閉馬達");
            } else if (Number(motor_data) < -50 || Number(motor_data) > 50 || !Number(motor_data)) {
                //$("#cmn-toggle-20").prop('checked', false);
                alert("您輸入的值已超過範圍，請重新輸入!" + !Number(motor_data));
                return false;
            };
            var value = "off";
            if (motor_data != 0) {
                value = motor_data;
                if (!confirm("你確定要開啟攪拌馬達，運轉速度為 " + motor_data + " RPM 嗎?")) {
                    return false;
                };
            } else {
                if (!confirm("你確定要關閉攪拌馬達嗎?")) {
                    return false;
                };
            };

            var data = { "tank_num": "F" + tank_num, "command": "tank_motor_status", "value": motor_data };
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    //$("#cmn-toggle-14").prop('checked', true); // prop 設置元素屬型與元素值, 設定 checked 屬性為 true
                    setTimeout("alert('攪拌馬達_開啟成功!')", 500); // 設定時間執行函式 delay(500), 只執行一次
                    var timer = setInterval(Rotate, 60000); // 啟動後會在 60000 毫秒(更新時間一分鐘)內不斷執行 (原因須配合更新時間？)

                } else if (res == 'off') {
                    //$("#cmn-toggle-14").prop('checked', false);
                    setTimeout("alert('攪拌馬達_關閉成功!')", 500);
                    clearInterval(timer);                   // 取消 timer 的不斷執行
                    $("#motor_rpm_status").text('');        // 設置 #motor_rpm_status 的文字為空, #井字號
                } else {
                    alert(res);
                };
            }, 'text')
        };

        function tankMotor(params) {
            var data = { "tank_num": "F" + tank_num, "command": "tank_motor_status", "value": params };
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    var timer = setInterval(Rotate, 60000); // 啟動後會在 60000 毫秒(更新時間一分鐘)內不斷執行 (原因須配合更新時間？)
                } else if (res == 'off') {
                    clearInterval(timer);                   // 取消 timer 的不斷執行
                    $("#motor_rpm_status").text('');        // 設置 #motor_rpm_status 的文字為空, #井字號
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function Rotate() {
            $.get('/peel', '', function (res) {
                //console.log(res.peeling);
                $("#motor_rpm_status-status").text(res.peeling + ' rpm(每1分鐘更新一次)');
            }, 'json');
        };

        function tankHeater1(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_heater1_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_heater1_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_heater1_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-26").prop('checked', false);
                    if (!confirm("你確定要開啟電熱管1嗎?")) {
                        return false;
                    };
                } else {
                    $("#cmn-toggle-26").prop('checked', true);
                    if (!confirm("你確定要關閉電熱管1嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_heater1_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-26").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-26").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function tankHeater2(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_heater2_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_heater2_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_heater2_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-29").prop('checked', false);
                    if (!confirm("你確定要開啟電熱管2嗎?")) {
                        return false;
                    };

                } else {
                    $("#cmn-toggle-29").prop('checked', true);
                    if (!confirm("你確定要關閉電熱管2嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "tank_heater2_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-29").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-29").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }
                
        function tankTempEnable(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_temp_enable_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "tank_temp_enable_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=tank_temp_enable_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-35").prop('checked', false);
                    if (!confirm("你確定要開啟溫度控制嗎?")) {
                        return false;
                    };

                } else {
                    $("#cmn-toggle-35").prop('checked', true);
                    if (!confirm("你確定要關閉溫度控制嗎?")) {
                        return false;
                    };
                };

                var data = { "tank_num": "F" + tank_num, "command": "tank_temp_enable_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    $("#cmn-toggle-35").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-35").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        // 判斷是否整數
        function isInteger(obj) {
            return obj % 1 === 0
        }
        isInteger(3) // true

        // 設定溫度
        function tankTemp_set() {
            var temp_data = $("input[id=tank_temp_data]").val();
            if (temp_data == '') {
                //$("#cmn-toggle-20").prop('checked', false);
                alert("請先輸入設定溫度!");
                return false;
            } else if (!isInteger(temp_data)) {
                //$("#cmn-toggle-20").prop('checked', false);
                alert("溫度設定僅限整數，請重新輸入!" + !Number(temp_data));
                return false;
            };
            var value = "0";
            //var check = $("input[name=peeling-machine-on]:checked");
            if ($("#cmn-toggle-35").prop('checked')) {
                value = temp_data;
                //$("#cmn-toggle-20").prop('checked', false);
                if (!confirm("你確定要設定內桶溫度為 " + temp_data + " ℃ 嗎？")) {
                    return false;
                };

            } else {
                //$("#cmn-toggle-20").prop('checked', true);
                //你確定要停止桶內溫度設定嗎
                if (!confirm("請先開啟溫控開關, 再設定桶內溫度")) {
                    return false;
                };
            };

            var data = { "tank_num": "F" + tank_num, "command": "tank_temp_status", "value": temp_data };
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                    //$("#cmn-toggle-14").prop('checked', true); // prop 設置元素屬型與元素值, 設定 checked 屬性為 true
                    setTimeout("alert('溫度設定_開啟成功!')", 500); // 設定時間執行函式 delay(500), 只執行一次
                    var timer = setInterval(Rotate, 60000); // 啟動後會在 60000 毫秒(更新時間一分鐘)內不斷執行 (原因須配合更新時間？)

                } else if (res == 'off') {
                    //$("#cmn-toggle-14").prop('checked', false);
                    setTimeout("alert('溫度設定_關閉成功!')", 500);
                    clearInterval(timer);                   // 取消 timer 的不斷執行
                    $("#motor_rpm_status").text('');        // 設置 #motor_rpm_status 的文字為空, #井字號
                } else {
                    alert(res);
                };
            }, 'text')
        };

        function tankTemp(params) {
            var data = { "tank_num": "F" + tank_num, "command": "tank_temp_status", "value": params };
            $.post('/mqtt/{{tid}}', data, function (res) {
                console.log('data:', data)
                if (res == 'on') {
                } else if (res == 'off') {
                } else {
                    console.log(res)
                };
            }, 'text')
        }

        function outputVacuum(params) {
            if (params == '1') {
                var data = { "tank_num": "F" + tank_num, "command": "output_vacuum_status", "value": "on" };
            } else if (params == '0') {
                var data = { "tank_num": "F" + tank_num, "command": "output_vacuum_status", "value": "off" };
            } else {
                var status = "off";
                var check = $("input[name=output_vacuum_status]:checked");
                //大於0代表有被選中
                if (check.length > 0) {
                    status = "on";
                    $("#cmn-toggle-32").prop('checked', false);
                    if (!confirm("你確定要開啟出料儲豆槽真空吸料機嗎?")) {
                        return false;
                    };

                } else {
                    $("#cmn-toggle-32").prop('checked', true);
                    if (!confirm("你確定要關閉出料儲豆槽真空吸料機嗎?")) {
                        return false;
                    };
                };
                var data = { "tank_num": "F" + tank_num, "command": "output_vacuum_status", "value": status };
            }
            $.post('/mqtt/{{tid}}', data, function (res) {
                if (res == 'on') {
                    $("#cmn-toggle-32").prop('checked', true);
                } else if (res == 'off') {
                    $("#cmn-toggle-32").prop('checked', false);
                } else {
                    console.log(res)
                };
            }, 'text')
        }


    </script>

    <script language="JavaScript">
                    
        function changeUpdate() {
            // aaa clearInterval(WebUpdate_set);
            var webupdate_time = $("input[name=webupdate_time]").val()
            console.log('webupdate_time' + webupdate_time)
            WebUpdate_set = setInterval(function(){WebUpdate(ftn)} , webupdate_time * 1000);
        }

        // jQuery 更新感測器致動器狀態
        function WebUpdate(ftn) {
            $.get('/loading/F' + ftn, '', function (res) {
                if (res.tank_vacuum == 0) {
                    $("#cmn-toggle-05").prop('checked', false);
                } else if (res.tank_vacuum == 1) {
                    $("#cmn-toggle-05").prop('checked', true);}

                if (res.tank_threewayvalve_input == 0) {
                    $("#cmn-toggle-08").prop('checked', false);
                } else if (res.tank_threewayvalve_input == 1) {
                    $("#cmn-toggle-08").prop('checked', true);}
                
                if (res.tank_diskvalve == 0) {
                    $("#cmn-toggle-11").prop('checked', false);
                } else if (res.tank_diskvalve == 1) {
                    $("#cmn-toggle-11").prop('checked', true);}

                if (res.solenoid_tank_pump == 0) {
                    $("#cmn-toggle-14").prop('checked', false);
                } else if (res.solenoid_tank_pump == 1) {
                    $("#cmn-toggle-14").prop('checked', true);}
                
                if (res.tank_solenoid_disinfect == 0) {
                    $("#cmn-toggle-17").prop('checked', false);
                } else if (res.tank_solenoid_disinfect == 1) {
                    $("#cmn-toggle-17").prop('checked', true);}
                
                if (res.outer_solenoid_water == 0) {
                    $("#cmn-toggle-38").prop('checked', false);
                } else if (res.outer_solenoid_water == 1) {
                    $("#cmn-toggle-38").prop('checked', true);}
                
                if (res.tank_solenoid_water_in == 0) {
                    $("#cmn-toggle-50").prop('checked', false);
                } else if (res.tank_solenoid_water_in == 1) {
                    $("#cmn-toggle-50").prop('checked', true);}

                if (res.tank_solenoid_water_out == 0) {
                    $("#cmn-toggle-53").prop('checked', false);
                } else if (res.tank_solenoid_water_out == 1) {
                    $("#cmn-toggle-53").prop('checked', true);}

                if (res.tank_pump_sensor == 0) {
                    $("#cmn-toggle-41").prop('checked', false);
                } else if (res.tank_pump_sensor == 1) {
                    $("#cmn-toggle-41").prop('checked', true);}
                
                if (res.outer_threewayvalve_float == 0) {
                    $("#cmn-toggle-47").prop('checked', false);
                } else if (res.outer_threewayvalve_float == 1) {
                    $("#cmn-toggle-47").prop('checked', true);}
                
                if (res.tank_heater1 == 0) {
                    $("#cmn-toggle-26").prop('checked', false);
                } else if (res.tank_heater1 == 1) {
                    $("#cmn-toggle-26").prop('checked', true);}
                
                if (res.tank_heater2 == 0) {
                    $("#cmn-toggle-29").prop('checked', false);
                } else if (res.tank_heater2 == 1) {
                    $("#cmn-toggle-29").prop('checked', true);}
                
                if (res.tank_temp_enable == 0) {
                    $("#cmn-toggle-35").prop('checked', false);
                } else if (res.tank_temp_enable == 1) {
                    $("#cmn-toggle-35").prop('checked', true);}
                
                $("#motor_rpm_data").attr("placeholder", res.tank_motor);
                $("#tank_temp_data").attr("placeholder", res.tank_temp);

                $("#SHT11_Temp_t_status").text(res.SHT11_Temp);
                $("#SHT11_Humidity_t_status").text(res.SHT11_Humidity);

                $("#CO2_t_status").text(res.CO2);
                $("#PH_t_status").text(res.PH);
                $("#ORP_t_status").text(res.ORP);
                $("#DO_t_status").text(res.DO);
                $("#EC_t_status").text(res.EC);
                $("#PA_t_status").text(res.PA);

                if (res.WaterLevel == '1') {
                    $("#WaterLevel_t_status").text('滿');
                } else if (res.WaterLevel == '0') {
                    $("#WaterLevel_t_status").text('可注水');
                } else {
                    $("#WaterLevel_t_status").text('ERROR');
                }
                
                $("[name = UltraSonic_t_status]").text(res.UltraSonic);
                $("[name = PressureWaterLevel_t_status]").text(res.PressureWaterLevel);

                if (res.WaterLevel == '1' && res.outer_solenoid_water == '1'){
                    outerSolenoidWater('0');
                    console.log('桶外注水 OFF')
                };

                $("#motorEncoder_t_status").text(res.motorEncoder);

            }, 'json');
        }
    </script>
</head>

<body>
    <div id="wrapper">
        <div id="coffee_header">
            <!-- 匯入共同使用的 header.html 內容 -->
            {% include 'header.html' %}
        </div>

        <!-- <div style="width: 500px; margin: 0px auto; background-color: lightgreen;">
            test
            <table>
                <tr>
                    <td style="color:red;">Valve</td>
                    <td>桶內<br>真空吸料機</td>
                    <td>入料三通閥</td>
                    <td>水泵逆洗<br>電磁閥</td>
                    <td>桶內消毒<br>電磁閥</td>
                    <td>桶外進水<br>電磁閥</td>
                    <td>桶內進水<br>電磁閥</td>
                    <td>桶內排水<br>電磁閥</td>
                    <td>感測器<br>雙核隔膜泵</td>
                    <td>外桶浮選<br>三通閥</td>
                    <td>馬達</td>
                    <td>加熱器 1</td>
                    <td>加熱器 2</td>
                    <td>溫控開關</td>
                    <td>溫度設定</td>
                    <td>蝴蝶閥</td>
                </tr>
            </table>
        </div> -->

        <h4>致動器</h4>
        <table border="1" class="table-all" cellpadding="3" style="text-align: center;">
            <tr>
                <td style="color:red;">Valve</td>
                <td>真空吸料機</td>
                <td>入料三通閥</td>
                <td>桶外進水<br>電磁閥</td>
                <td>桶內進水<br>電磁閥</td>
                <td>感測器<br>雙核隔膜泵</td>
                <td>外桶浮選<br>三通閥</td>
                <td>馬達</td>
                <td>加熱器 1</td>
                <td>加熱器 2</td>
                <td>溫控開關</td>
                <td>溫度設定</td>
                <td>水泵逆洗<br>電磁閥</td>
                <td>桶內排水<br>電磁閥</td>
                <td>桶內消毒<br>電磁閥</td>
                <td>蝴蝶閥</td>
            </tr>
            <tr>
                <td>
                    <span style="color:#C0C0C0;">off</span>
                    <span style="color:#008CBA;">on</span>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-04">
                        </div>
                        <div class="switch text-center">
                            {% if tank_vacuum=='ON' %}
                            <input id="cmn-toggle-05" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="tank_vacuum_status" value="ON" onclick="tankVacuum()">
                            {% else %}
                            <input id="cmn-toggle-05" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_vacuum_status" value="OFF" onclick="tankVacuum()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-05"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-06">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-07">
                        </div>
                        <div class="switch text-center">
                            {% if tank_threewayvalve_input=='ON' %}
                            <input id="cmn-toggle-08" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="tank_threewayvalve_input_status" value="ON" onclick="tankThreeWayValveInput()">
                            {% else %}
                            <input id="cmn-toggle-08" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_threewayvalve_input_status" value="OFF" onclick="tankThreeWayValveInput()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-08"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-09">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-37">
                        </div>
                        <div class="switch text-center">
                            {% if outer_solenoid_water=='ON' %}
                            <input id="cmn-toggle-38" class="cmn-toggle cmn-toggle-round-flat" checked type="checkbox"
                                name="outer_solenoid_water_status" value="ON" onclick="outerSolenoidWater()">
                            {% else %}
                            <input id="cmn-toggle-38" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="outer_solenoid_water_status" value="OFF" onclick="outerSolenoidWater()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-38"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-39">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-49">
                        </div>
                        <div class="switch text-center">
                            {% if tank_solenoid_water_in=='ON' %}
                            <input id="cmn-toggle-50" class="cmn-toggle cmn-toggle-round-flat" checked type="checkbox"
                                name="tank_solenoid_water_in_status" value="ON" onclick="tankSolenoidWaterIn()">
                            {% else %}
                            <input id="cmn-toggle-50" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_solenoid_water_in_status" value="OFF" onclick="tankSolenoidWaterIn()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-50"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-51">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-40">
                        </div>
                        <div class="switch text-center">
                            {% if tank_pump_sensor=='ON' %}
                            <input id="cmn-toggle-41" class="cmn-toggle cmn-toggle-round-flat" checked type="checkbox"
                                name="tank_pump_sensor_status" value="ON" onclick="tankPumpSensor()">
                            {% else %}
                            <input id="cmn-toggle-41" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_pump_sensor_status" value="OFF" onclick="tankPumpSensor()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-41"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-42">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-46">
                        </div>
                        <div class="switch text-center">
                            {% if outer_threewayvalve_float=='ON' %}
                            <input id="cmn-toggle-47" class="cmn-toggle cmn-toggle-round-flat" checked type="checkbox"
                                name="outer_threewayvalve_float_status" value="ON" onclick="outerThreeWayValveFloat()">
                            {% else %}
                            <input id="cmn-toggle-47" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="outer_threewayvalve_float_status" value="OFF" onclick="outerThreeWayValveFloat()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-47"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-48">
                        </div>
                    </div>
                </td>
                <td>
                    <input type="text" class="input-text" id="motor_rpm_data" placeholder="{{tank_motor}}" value="">RPM<br>
                    <input type="button" class="input-button" value="Confirm" onclick="tankMotor_set()">
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-25">
                        </div>
                        <div class="switch text-center">
                            {% if tank_heater1=='ON' %}
                            <input id="cmn-toggle-26" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="tank_heater1_status" value="ON" onclick="tankHeater1()">
                            {% else %}
                            <input id="cmn-toggle-26" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_heater1_status" value="OFF" onclick="tankHeater1()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-26"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-27">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-28">
                        </div>
                        <div class="switch text-center">
                            {% if tank_heater2=='ON' %}
                            <input id="cmn-toggle-29" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="tank_heater2_status" value="ON" onclick="tankHeater2()">
                            {% else %}
                            <input id="cmn-toggle-29" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_heater2_status" value="OFF" onclick="tankHeater2()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-29"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-30">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-34">
                        </div>
                        <div class="switch text-center">
                            {% if tank_temp_enable=='ON' %}
                            <input id="cmn-toggle-35" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="tank_temp_enable_status" value="ON" onclick="tankTempEnable()">
                            {% else %}
                            <input id="cmn-toggle-35" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_temp_enable_status" value="OFF" onclick="tankTempEnable()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-35"></label>
                        </div>
                        <div class="switch">
                            <input id="cmn-toggle-36" class="cmn-toggle cmn-toggle-yes-no" type="checkbox">
                            <label class="label_ActuatorStatus" for="cmn-toggle-36" data-on="Yes" data-off="No"></label>
                        </div>
                    </div>
                </td>
                <td>
                    <input type="text" class="input-text" id="tank_temp_data" placeholder="{{tank_temp}}" value="">℃<br>
                    <input type="button" class="input-button" value="Confirm" onclick="tankTemp_set()">
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-13">
                        </div>
                        <div class="switch text-center">
                            {% if solenoid_tank_pump =='ON' %}
                            <input id="cmn-toggle-14" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="solenoid_tank_pump_status" value="ON" onclick="tankSolenoidPump()">
                            {% else %}
                            <input id="cmn-toggle-14" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="solenoid_tank_pump_status" value="OFF" onclick="tankSolenoidPump()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-14"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-15">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-52">
                        </div>
                        <div class="switch text-center">
                            {% if tank_solenoid_water_out =='ON' %}
                            <input id="cmn-toggle-53" class="cmn-toggle cmn-toggle-round-flat" checked type="checkbox"
                                name="tank_solenoid_water_out_status" value="ON" onclick="tankSolenoidWaterOut()">
                            {% else %}
                            <input id="cmn-toggle-53" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_solenoid_water_in_status" value="OFF" onclick="tankSolenoidWaterOut()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-53"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-54">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-16">
                        </div>
                        <div class="switch text-center">
                            {% if tank_solenoid_disinfect=='ON' %}
                            <input id="cmn-toggle-17" class="cmn-toggle cmn-toggle-round-flat" checked type="checkbox"
                                name="tank_solenoid_disinfect_status" value="ON" onclick="tankSolenoidDisinfect()">
                            {% else %}
                            <input id="cmn-toggle-17" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_solenoid_disinfect_status" value="OFF" onclick="tankSolenoidDisinfect()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-17"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-18">
                        </div>
                    </div>
                </td>
                <td>
                    <div class="switch_div">
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-round" id="cmn-toggle-10">
                        </div>
                        <div class="switch text-center">
                            {% if tank_diskvalve=='ON' %}
                            <input id="cmn-toggle-11" class="cmn-toggle cmn-toggle-round-flat" type="checkbox" checked
                                name="tank_diskvalve_status" value="ON" onclick="tankDiskValve()">
                            {% else %}
                            <input id="cmn-toggle-11" class="cmn-toggle cmn-toggle-round-flat" type="checkbox"
                                name="tank_diskvalve_status" value="OFF" onclick="tankDiskValve()">
                            {% endif %}
                            <label class="label_ActuatorStatus" for="cmn-toggle-11"></label>
                        </div>
                        <div class="switch">
                            <input type="checkbox" class="cmn-toggle cmn-toggle-yes-no" id="cmn-toggle-12">
                        </div>
                    </div>
                </td>
            </tr>
            <tr>
                <td><span style="color:#008CBA;"><b>ON</b></span></td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_vacuum_ON" onclick="tankVacuum('1')"></td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_threewayvalve_input_ON"
                        onclick="tankThreeWayValveInput('1')"></td>
                <td><input type="button" class="input-button-on" value="ON" name="outer_solenoid_water_ON" onclick="outerSolenoidWater('1')">
                </td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_solenoid_water_in_ON" onclick="tankSolenoidWaterIn('1')">
                </td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_pump_sensor_ON" onclick="tankPumpSensor('1')">
                </td>
                <td><input type="button" class="input-button-on" value="ON" name="outer_threewayvalve_float_ON"
                        onclick="outerThreeWayValveFloat('1')">
                </td>
                <td><input type="button" class="input-button-on" value="20" name="tank_motor_ON" onclick="tankMotor('20')"></td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_heater1_ON" onclick="tankHeater1('1')"></td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_heater2_ON" onclick="tankHeater2('1')"></td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_temp_enable_ON" onclick="tankTempEnable('1')"></td>
                <td><input type="button" class="input-button-on" value="30" name="tank_temp_ON" onclick="tankTemp('30')"></td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_solenoid_water_in_ON" onclick="tankSolenoidPump('1')">
                </td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_solenoid_water_out_ON" onclick="tankSolenoidWaterOut('1')">
                </td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_solenoid_disinfect_ON" onclick="tankSolenoidDisinfect('1')">
                </td>
                <td><input type="button" class="input-button-on" value="ON" name="tank_diskvalve_ON" onclick="tankDiskValve('1')"></td>
            </tr>
            <tr>
                <td><span style="color:#C0C0C0;"><b>OFF</b></span></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_vacuum_OFF" onclick="tankVacuum('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_threewayvalve_input_OFF"
                        onclick="tankThreeWayValveInput('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="outer_solenoid_water_OFF" onclick="outerSolenoidWater('0')">
                </td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_solenoid_water_in_OFF" onclick="tankSolenoidWaterIn('0')">
                </td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_pump_sensor_OFF" onclick="tankPumpSensor('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="outer_threewayvalve_float_OFF"
                        onclick="outerThreeWayValveFloat('0')"></td>
                <td><input type="button" class="input-button-off" value="0" name="tank_motor_OFF" onclick="tankMotor('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_heater1_OFF" onclick="tankHeater1('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_heater2_OFF" onclick="tankHeater2('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_temp_enable_OFF" onclick="tankTempEnable('0')"></td>
                <td><input type="button" class="input-button-off" value="0" name="tank_temp_OFF" onclick="tankTemp('0.0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_solenoid_water_in_OFF"
                    onclick="tankSolenoidPump('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_solenoid_water_out_OFF" onclick="tankSolenoidWaterOut('0')">
                </td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_solenoid_disinfect_OFF"
                        onclick="tankSolenoidDisinfect('0')"></td>
                <td><input type="button" class="input-button-off" value="OFF" name="tank_diskvalve_OFF" onclick="tankDiskValve('0')"></td>
            </tr>
        </table>

        <br>

        <h4>感測器</h4>
        <table border="1" class="table-all" cellpadding="3">
            <tr>
                <td style="background-color:#f3f3f3">[桶內] 生豆/水位高度</td>
                <td><span name="UltraSonic_t_status">{{tank_UltraSonic.UltraSonic}}</span> 公分</td>
                <td style="background-color:#f3f3f3">[桶外] 水位高度</td>
                <td><span id="WaterLevel_t_status">{{WaterLevel}}</span></td>
                <td style="background-color:#f3f3f3">馬達編碼器</td>
                <td><span id="motorEncoder_t_status">{{tank_motorEncoder.motorEncoder}}</span> RPM</td>
            </tr>
            <tr>
                <td style="background-color:#f3f3f3">溫度</td>
                <td><span id="SHT11_Temp_t_status">{{tank_SHT11.SHT11_Temp}}</span> ℃</td>
                <td style="background-color:#f3f3f3">濕度</td>
                <td><span id="SHT11_Humidity_t_status">{{tank_SHT11.SHT11_Humidity}}</span> %</td>
                <td style="background-color:#f3f3f3">二氧化碳</td>
                <td><span id="CO2_t_status">{{tank_CO2.CO2}}</span> ppm</td>
                <td style="background-color:#f3f3f3">氣壓</td>
                <td><span id="PA_t_status">{{tank_PA.PA}}</span> Pa</td>
            </tr>
            <tr>
                <td style="background-color:#f3f3f3">pH</td>
                <td><span id="PH_t_status">{{tank_PH.PH}}</span></td>
                <td style="background-color:#f3f3f3">ORP</td>
                <td><span id="ORP_t_status">{{tank_ORP.ORP}}</span> mV</td>
                <td style="background-color:#f3f3f3">DO</td>
                <td><span id="DO_t_status">{{tank_DO.DO}}</span> mg/L</td>
                <td style="background-color:#f3f3f3">EC</td>
                <td><span id="EC_t_status">{{tank_EC.EC}}</span> μS/cm</td>
            </tr>
        </table>

        <br>

        <h4>排程測試</h4>
        <table border="1" class="table-all" cellpadding="3">
            <tr>
                <td>發酵</td>
                <td>入豆</td>
                <td>入水</td>
                <td>水質測量 (攪拌、加熱)</td>
            </tr>
            <tr>
                <td>
                    -- 入豆 --<br>
                    指定桶內生豆高度
                    <input type="text" class="input-text" name="testing_tank_bean_height_F" value="10">公分<br>
                    -- 入水 --<br>
                    桶外加滿水<br>
                    指定桶內水位高度
                    <input type="text" class="input-text" name="testing_tank_water_height_F" value="20">公分<br>
                    -- 發酵 --<br>
                    指定溫度
                    <input type="text" class="input-text" name="testing_tank_temp_F" value="21">℃<br>
                    指定時間
                    <input type="text" class="input-text" name="testing_tank_time_F" value="10">秒<br>
                    -- 出料 --<br>
                    設定空桶高度
                    <input type="text" class="input-text" name="testing_tank_empty_height_F" value="1">公分<br>
                    <!--
                    入料吸料時間(秒)
                    <input type="text" class="input-text" name="testing_tank_vacuum_in_F" value="1">
                    <br>
                    入料放料時間(>10秒)
                    <input type="text" class="input-text" name="testing_tank_vacuum_out_F" value="10">
                    <br>
                    入料循環次數
                    <input type="text" class="input-text" name="testing_tank_vacuum_loop_F" value="4">
                    <br>
                    桶外注水
                    <br>
                    桶外滿水時加熱
                    <br>
                    溫度達設定溫度時, 停止加熱
                    <br>
                    馬達 rpm
                    <input type="text" class="input-text" name="testing_motor_rpm_F" value="20" style="width:100px;">
                    <br>
                    出料吸料時間(秒)
                    <input type="text" class="input-text" name="testing_out_vacuum_in_F" value="1"
                        style="width: 40px;">
                    <br>
                    出料放料時間(>10秒)
                    <input type="text" class="input-text" name="testing_out_vacuum_out_F" value="10"
                        style="width: 40px;">
                    <br>
                    出料循環次數
                    <input type="text" class="input-text" name="testing_out_vacuum_loop_F" value="4"
                        style="width: 40px;">
                    -->
                </td>
                <td>
                    [桶內] 生豆/水位高度：<span name="UltraSonic_t_status">{{tank_UltraSonic.UltraSonic}}</span> 公分<br>
                    指定咖啡豆高度
                    <input type="text" class="input-text" name="testing_tank_coffee_height" id="testing_tank_coffee_height" value="0"
                        style="width: 40px;">公分<br>
                    入料吸料時間
                    <input type="text" class="input-text" name="testing_tank_vacuum_in" id="testing_tank_vacuum_in" value="1" style="width: 40px;">秒<br>
                    入料放料時間(>10)
                    <input type="text" class="input-text" name="testing_tank_vacuum_out" id="testing_tank_vacuum_out" value="10" style="width: 40px;">秒<br>
                    入料循環次數
                    <input type="text" class="input-text" name="testing_tank_vacuum_loop" id="testing_tank_vacuum_loop" value="3" style="width: 40px;">次
                </td>
                <td>
                    [桶內] 生豆/水位高度：<span name="UltraSonic_t_status">{{tank_UltraSonic.UltraSonic}}</span>&nbsp;公分<br>
                    指定水量高度
                    <input type="text" class="input-text" name="testing_tank_water_height" id="testing_tank_water_height" value="100" style="width: 40px;">公分
                </td>
                <td>
                    馬達
                    <input type="text" class="input-text" name="testing_motor_rpm" id="testing_motor_rpm" value="0">rpm<br>
                    <!--
                    發酵時間(秒)
                    <input type="text" class="input-text" name="testing_tank_dry_time" id="testing_tank_dry_time">
                    <br>
                    溫度控制(℃)
                    <input type="text" class="input-text" name="AAA" id="AAA">
                    -->
                    加熱器 1、2 ON
                    <br>
                    pump 開啟時間
                    <input type="text" class="input-text" name="testing_tank_pump_on" id="testing_tank_pump_on" value="10">秒<br>
                    pump 關閉時間
                    <input type="text" class="input-text" name="testing_tank_pump_off" id="testing_tank_pump_off" value="10">秒<br>
                    pump 循環次數
                    <input type="text" class="input-text" name="testing_tank_pump_loop" id="testing_tank_pump_loop" value="3">次<br>
                </td>
            </tr>
            <tr>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="testing_F()">發酵測試</button>
                    <script>
                        // 入水狀態
                        var WaterIn_F_Process = 0;     
                        // 入豆狀態 
                        var BeanIn_F_Process = 0;    
                        // 發酵狀態   
                        var Fermenting_F_Process = 0;   
                        // 出料狀態
                        var WaterBeanOut_F_Process = 0; 

                        // 發酵
                        function testing_F() {
                            // aaa clearInterval(WebUpdate_set);

                            /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

                            // -- 入豆 --
                            var testing_tank_bean_height_F = $("input[name=testing_tank_bean_height_F]").val();
                            var BeanIn_F_interval = setInterval(BeanIn_F, 5000);
                            // -- 入水 --
                            var WaterIn_F_interval

                            function BeanIn_F(){
                                if (BeanIn_F_Process == 1) {
                                    return; // 若還在處理就取消, 函式立即停止
                                }

                                var testing_tank_water_height_F = $("input[name=testing_tank_water_height_F]").val();

                                // 取得桶內生豆高度
                                BeanIn_F_Process = 1;
                                $.ajax({
                                    async:false,
                                    type:"GET",
                                    url:"/ferment_UltraSonic_" + tank_num,
                                    dataType:'json',
                                    success:function(response){
                                        var present_Bean_height = response.UltraSonic
                                        console.log("目前豆高: " + present_Bean_height)
                                        console.log("指定豆高: " + testing_tank_bean_height_F)

                                        if ( parseInt(present_Bean_height) >= parseInt(testing_tank_bean_height_F) ) {
                                            clearInterval(BeanIn_F_interval);
                                            console.log("已達生豆高度！")

                                            // 讀取指定水高
                                            var testing_tank_water_height_F = $("input[name=testing_tank_water_height_F]").val();
                                            console.log("指定水高: " + testing_tank_water_height_F)

                                            // 若桶內水還沒滿, 開啟桶內入水
                                            $.get('/ferment_UltraSonic_' + tank_num, '', function (res) {
                                                if ( res.UltraSonic < testing_tank_water_height_F ){
                                                    console.log('桶內開始入水')

                                                    tankSolenoidWaterIn('1');
                                                    console.log('tankSolenoidWaterIn_ON')

                                                    console.log('請開啟水龍頭進水')
                                                };
                                            }, 'json');

                                            // 若桶外水還沒滿, 開啟桶外入水
                                            $.get('/ferment_WaterLevel_' + tank_num, '', function (res) {
                                                if ( res.WaterLevel != 1 ){
                                                    console.log('桶外開始入水')

                                                    outerSolenoidWater('1');
                                                    console.log('tankSolenoidWaterIn_ON')

                                                    console.log('請開啟水龍頭進水')
                                                };
                                            }, 'json');

                                            // 入水每五秒判斷
                                            WaterIn_F_interval = setInterval(WaterIn_F, 5000);

                                        } else {
                                            tankVacuum('1')
                                            console.log("tankVacuum_ON")

                                            var time = new Date();
                                            while ((new Date() - time) < 2 * 1000) { };

                                            tankVacuum('0')
                                            console.log("tankVacuum_OFF")
                                        }
                                        BeanIn_F_Process = 0;
                                    },
                                    error:function(thrownError){
                                        console.log("Error: " + thrownError)
                                        BeanIn_F_Process = 0;
                                    }
                                });
                            };
                            
                            // 入豆排程
                            var Fermenting_F_interval

                            function WaterIn_F(){
                                if(WaterIn_F_Process == 1){
                                    return;     // 若還在處理就取消, 函式立即停止
                                }

                                // 取得桶內目前水位、取得桶外是否達水位計
                                WaterIn_F_Process = 1;
                                $.ajax({
                                    async:false,
                                    type:"GET",
                                    url:"/ferment_WaterIn_" + tank_num,
                                    dataType:"JSON",
                                    success:function(response){
                                        var testing_tank_water_height_F = parseInt($("input[name=testing_tank_water_height_F]").val());
                                        var present_tank_water_height = parseInt(response.UltraSonic)
                                        var present_WaterLevel = response.WaterLevel
                                        if (present_WaterLevel == 1 && present_tank_water_height >= testing_tank_water_height_F) {
                                            clearInterval(WaterIn_F_interval);
                                            console.log("入水完成！")

                                            var testing_tank_temp_F = $("input[name=testing_tank_temp_F]").val();
                                            var testing_tank_time_F = $("input[name=testing_tank_time_F]").val();
                                            console.log("指定溫度: " + testing_tank_temp_F)
                                            console.log("指定時間: " + testing_tank_time_F)

                                            tankMotor('20')
                                            console.log("tankMotor_ON")

                                            // 取得桶內溫度, 若低於指定溫度則開啟加熱器
                                            $.get('/ferment_SHT11_' + tank_num, '', function(res){
                                                if (res.SHT11_Temp < testing_tank_temp_F){
                                                    tankHeater1('1')
                                                    console.log("tankHeater1_ON")
                                                    tankHeater2('1')
                                                    console.log("tankHeater2_ON")
                                                }
                                            });

                                            // -- 發酵 --
                                            console.log("進入發酵流程")
                                            Fermenting_F_interval = setInterval(Fermenting_F, 5000);
                                            
                                        }
                                        else if (present_WaterLevel == 1) {
                                            outerSolenoidWater('0')
                                            console.log("outerSolenoidWater_OFF")
                                            console.log("桶外入水完成, 桶內加水中")
                                        }
                                        else if (present_tank_water_height > testing_tank_water_height_F) {
                                            tankSolenoidWaterIn('0')
                                            console.log("tankSolenoidWaterIn_OFF")
                                            console.log("桶內入水完成, 桶外加水中")
                                        }
                                        WaterIn_F_Process = 0;
                                    },
                                    error:function(thrownError){
                                        console.log("Error: " + thrownError)
                                        WaterIn_F_Process = 0;
                                    }
                                });   
                                WaterIn_F_Process = 0;
                            }


                            // 出水排豆排程
                            var WaterBeanOut_F_interval

                            function Fermenting_F(){
                                var testing_tank_temp_F = $("input[name=testing_tank_temp_F]").val();
                                var testing_tank_time_F = $("input[name=testing_tank_time_F]").val();
                                if (Fermenting_F_Process == 1) {
                                    return;                                
                                }

                                // 取得現在溫度
                                Fermenting_F_Process = 1;
                                $.ajax({
                                    async:false,
                                    type:"GET",
                                    url:"/ferment_SHT11_" + tank_num,
                                    dataType:"json",
                                    success:function(response){
                                        var present_Temp = response.SHT11_Temp
                                        console.log("現在溫度: " + present_Temp)

                                        if (present_Temp >= testing_tank_temp_F) {
                                            clearInterval(Fermenting_F_interval)
                                            console.log("已達指定溫度！")

                                            tankHeater1('0')
                                            console.log("tankHeater1_OFF")

                                            tankHeater2('0')
                                            console.log("tankHeater2_OFF")

                                            console.log("發酵 " + testing_tank_time_F + " 秒")
                                            var time = new Date();
                                            while ((new Date() - time) < testing_tank_time_F * 1000) { };

                                            tankMotor('0')
                                            console.log("tankMotor_OFF")

                                            WaterBeanOut_F_interval = setInterval(WaterBeanOut_F, 5000);
                                        }
                                        Fermenting_F_Process = 0;
                                    },
                                    error:function(thrownError){
                                        console.log("Error: " + thrownError)
                                        Fermenting_F_Process = 0;
                                    }
                                });

                            };

                            function WaterBeanOut_F(){
                                // -- 出料 --
                                // 設定空桶高度
                                var testing_tank_empty_height_F = $("input[name=testing_tank_empty_height_F]").val();
                                console.log("設定空桶高度: " + testing_tank_empty_height_F)
                                if (WaterBeanOut_F_Process == 1){
                                    return;
                                }

                                // 取得桶內生豆高度
                                WaterBeanOut_F_Process = 1;
                                $.ajax({
                                    async:false,
                                    type:"GET",
                                    url:"/ferment_UltraSonic_" + tank_num,
                                    dataType:"json",
                                    success:function(response){
                                        var present_Bean_height = response.UltraSonic
                                        console.log("目前發酵豆高/水位: " + present_Bean_height)
                                        if (present_Bean_height >　testing_tank_empty_height_F) {
                                            outputVacuum('1')
                                            console.log("outputVacuum_ON")

                                            var time = new Date();
                                            while ((new Date() - time) < 2 * 1000) { };

                                            outputVacuum('0')
                                            console.log("outputVacuum_OFF")
                                        }　else {
                                            clearInterval(WaterBeanOut_F_interval);
                                            console.log("發酵完成！槽內已無生豆")
                                        }
                                        WaterBeanOut_F_Process = 0;
                                    },
                                    error:function(thrownError){
                                        console.log("Error: " + thrownError)
                                        WaterBeanOut_F_Process = 0;
                                    }
                                })
                            };
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="CoffeeIn_testing()">入豆測試</button>
                    <script>
                        // 入豆狀態
                        CoffeeIn_Process = 0;   
                        function CoffeeIn_testing() {
                            var testing_tank_coffee_height = $("input[name=testing_tank_coffee_height]").val();
                            console.log('目標入料高度' + testing_tank_coffee_height)

                            var testing_tank_vacuum_in = $("input[name=testing_tank_vacuum_in]").val();
                            var testing_tank_vacuum_out = $("input[name=testing_tank_vacuum_out]").val();
                            var testing_tank_vacuum_loop = $("input[name=testing_tank_vacuum_loop]").val();

                            if (testing_tank_coffee_height != 0) {
                                console.log('以目標高度入豆')

                                var Coffee_interval = setInterval(tankCoffeeHeight, 5000);

                                function tankCoffeeHeight(){
                                    if (CoffeeIn_Process == 1){
                                        return;
                                    }
                                    
                                    CoffeeIn_Process = 1;
                                    $.ajax({
                                        async:false,
                                        type:'GET',
                                        url:'/ferment_UltraSonic_' + tank_num,
                                        dataType:'JSON',
                                        success:function(response){
                                            var present_Coffee_height = response.UltraSonic
                                            console.log("目前生豆高度: ", present_Coffee_height)

                                            if( present_Coffee_height >= testing_tank_coffee_height){
                                                clearInterval(Coffee_interval);
                                                console.log("生豆已達目標高度！")
                                            } else {
                                                tankVacuum('1')
                                                console.log('tankVacuum_ON')

                                                var time = new Date();
                                                while ((new Date() - time) < testing_tank_vacuum_in * 1000) { };

                                                tankVacuum('0')
                                                console.log('tankVacuum_OFF')

                                                var time = new Date();
                                                while ((new Date() - time) < testing_tank_vacuum_out * 1000) { };
                                            }
                                            CoffeeIn_Process = 0;
                                        },
                                        error:function(thrownError){
                                            console.log("Error: " + thrownError)
                                            CoffeeIn_Process = 0;
                                        }
                                    });
                                };

                                
                            } else if (testing_tank_coffee_height == 0){
                                console.log('開始循環入豆')

                                for (step = 1; step <= testing_tank_vacuum_loop; step++) {
                                    console.log('-- 循環第 ' + step + ' 次 --');

                                    tankVacuum('1')
                                    console.log('tankVacuum_ON')

                                    var time = new Date();
                                    while ((new Date() - time) < testing_tank_vacuum_in * 1000) { };

                                    tankVacuum('0')
                                    console.log('tankVacuum_OFF')

                                    var time = new Date();
                                    while ((new Date() - time) < testing_tank_vacuum_out * 1000) { };
                                }

                                console.log('-- 循環入豆結束 --')

                            }
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="WaterIn_testing()">入水測試</button>
                    <script>
                        var WaterIn_Process = 0;    // 發酵槽入水狀態
                        function WaterIn_testing() {
                            var testing_tank_water_height = $("input[name=testing_tank_water_height]").val();
                            console.log('testing_tank_water_height: ' + testing_tank_water_height)

                            $.get('/ferment_UltraSonic_' + tank_num, '', function (res) {
                                if ( res.UltraSonic < testing_tank_water_height ){
                                    console.log('開始入水')

                                    tankSolenoidWaterIn('1');
                                    console.log('tankSolenoidWaterIn_ON')

                                    console.log('請開啟水龍頭進水')

                                    var time = new Date();
                                    while ((new Date() - time) < 1000) { };
                                };

                            }, 'json');
                            

                            var WaterIn_interval = setInterval(tankWaterIn, 5000);

                            function tankWaterIn(){
                                if(WaterIn_Process == 1){
                                    return;
                                }
                                WaterIn_Process = 1;
                                $.ajax({
                                    type:"GET",
                                    url:'/ferment_UltraSonic_' + tank_num,
                                    dataType:'json',
                                    success:function(response){
                                        var present_water_height = response.UltraSonic
                                        console.log('目前水位高度: ' + present_water_height)

                                        if( parseInt(present_water_height) >= parseInt(testing_tank_water_height) ){
                                            clearInterval(WaterIn_interval);
                                            console.log('達到目標水位！')
                                            console.log('請關閉水龍頭')

                                            var time = new Date();
                                            while ((new Date() - time) < 1000) { };

                                            tankSolenoidWaterIn('0');
                                            console.log('tankSolenoidWaterIn_OFF')
                                        }
                                        WaterIn_Process = 0;
                                    },
                                    error:function(thrownError){
                                        console.log("Error: " + thrownError)
                                        WaterIn_Process = 0;
                                    }
                                });
                                WaterIn_Process = 0;
                            }
                        };
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="WATER_testing()">水質測量(攪拌、加熱)</button>
                    <script>
                        function WATER_testing() {
                            var set_motor_rpm = $("input[name=testing_motor_rpm]").val();
                            var data = { "tank_num": "F" + tank_num, "command": "tank_motor_status", "value": set_motor_rpm };
                            $.post('/mqtt/{{tid}}', data, function (res) {
                                console.log('data:', data)
                                if (res == 'on') {
                                    var timer = setInterval(Rotate, 60000); // 啟動後會在 60000 毫秒(更新時間一分鐘)內不斷執行 (原因須配合更新時間？)
                                } else if (res == 'off') {
                                    clearInterval(timer);                   // 取消 timer 的不斷執行
                                } else {
                                };
                            }, 'text')

                            // setTimeout(function () { location.reload(); }, 500);
                            console.log('motor rpm:' + set_motor_rpm)

                            var time = new Date();
                            while ((new Date() - time) < testing_tank_vacuum_out * 1000) { };

                            tankHeater1('1')
                            console.log('tankHeater1_ON')

                            var time = new Date();
                            while ((new Date() - time) < testing_tank_vacuum_out * 1000) { };

                            tankHeater2('1')
                            console.log('tankHeater2_ON')

                            console.log('暫停 5 秒鐘')
                            var time = new Date();
                            while ((new Date() - time) < 5 * 1000) { };

                            var testing_tank_pump_on = $("input[name=testing_tank_pump_on]").val();
                            var testing_tank_pump_off = $("input[name=testing_tank_pump_off]").val();
                            var testing_tank_pump_loop = $("input[name=testing_tank_pump_loop]").val();

                            for (step = 1; step <= testing_tank_pump_loop; step++) {
                                console.log('-- pump 循環第 ' + step + ' 次 --')

                                tankPumpSensor('1')
                                console.log('tankPumpSensor_ON')

                                var time = new Date();
                                while ((new Date() - time) < testing_tank_pump_on * 1000) { };

                                tankPumpSensor('0')
                                console.log('tankPumpSensor_OFF')

                                var time = new Date();
                                while ((new Date() - time) < testing_tank_pump_off * 1000) { };
                            }

                            console.log('暫停 5 秒鐘')
                            var time = new Date();
                            while ((new Date() - time) < 5 * 1000) { };

                            tankMotor('0')
                            console.log('tankMotor_OFF')

                            var time = new Date();
                            while ((new Date() - time) < testing_tank_vacuum_out * 1000) { };

                            tankHeater1('0')
                            console.log('tankHeater1_OFF')

                            var time = new Date();
                            while ((new Date() - time) < testing_tank_vacuum_out * 1000) { };

                            tankHeater2('0')
                            console.log('tankHeater2_OFF')

                        };
                    </script>
                </td>
            </tr>
        </table>

        <br>

        <h4>水路排程測試</h4>
        [桶外] 水位高度：<span id="WaterLevel_t_status">{{WaterLevel}}</span>
        <table border="1" class="table-all" cellpadding="3">
            <tr>
                <td colspan="2">桶內進水</td>
                <td colspan="2">桶外進水</td>
                <td colspan="2">消毒/打菌</td>
                <td colspan="2">感測器 pump 進水</td>
            </tr>
            <tr>
                <td>桶內進水 ON</td>
                <td>桶內進水 OFF</td>
                <td>桶外進水 ON</td>
                <td>桶外進水 OFF</td>
                <td>消毒/打菌 ON</td>
                <td>消毒/打菌 OFF</td>
                <td>感測器 pump 進水 ON</td>
                <td>感測器 pump 進水 OFF</td>
            </tr>
            <tr>
                <td>桶外電磁閥 OFF<br>桶內電磁閥 ON<br><font color="#FF0000">水龍頭 ON</font></td>
                <td><font color="#FF0000">水龍頭 OFF</font><br>桶內電磁閥 OFF</td>
                <td>桶內電磁閥 OFF<br>桶外電磁閥 ON<br><font color="#FF0000">水龍頭 ON</font></td>
                <td><font color="#FF0000">水龍頭 OFF</font><br>桶外電磁閥 OFF</td>
                <td>消毒電磁閥 ON<br><font color="#FF0000">水龍頭 ON</font></td>
                <td><font color="#FF0000">水龍頭 OFF</font><br>消毒電磁閥 OFF</td>
                <td>桶內電磁閥 ON<br>pump ON</td>
                <td>pump OFF<br>桶內電磁閥 OFF</td>
            </tr>
            <tr>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="tank_WaterIn_ON_testing()">桶內進水 ON</button>
                    <script>
                        // 桶外電磁閥 OFF<br>桶內電磁閥 ON<br>水泵逆洗電磁閥 ON<br><font color="#FF0000">水龍頭 ON</font>
                        function tank_WaterIn_ON_testing(){
                            outerSolenoidWater('0')
                            console.log('outerSolenoidWater_OFF')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            tankSolenoidWaterIn('1')
                            console.log('tankSolenoidWaterIn_ON')

                            console.log('請開啟水龍頭進水')
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="tank_WaterIn_OFF_testing()">桶內進水 OFF</button>
                    <script>
                        // <font color="#FF0000">水龍頭 OFF</font><br>水泵逆洗電磁閥 OFF<br>桶內電磁閥 OFF
                        function tank_WaterIn_OFF_testing(){
                            console.log('請關閉水龍頭進水')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            tankSolenoidWaterIn('0')
                            console.log('tankSolenoidWaterIn_OFF')

                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="outer_WaterIn_ON_testing()">桶外進水 ON</button>
                    <script>
                        // 桶內電磁閥 OFF<br>桶外電磁閥 ON<br>水泵逆洗電磁閥 ON<br><font color="#FF0000">水龍頭 ON
                        function outer_WaterIn_ON_testing(){
                            tankSolenoidWaterIn('0')
                            console.log('tankSolenoidWaterIn_OFF')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            outerSolenoidWater('1')
                            console.log('outerSolenoidWater_ON')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            console.log('請開啟水龍頭進水')
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="outer_WaterIn_OFF_testing()">桶外進水 OFF</button>
                    <script>
                        // <font color="#FF0000">水龍頭 OFF</font><br>水泵逆洗電磁閥 OFF<br>桶外電磁閥 OFF
                        function outer_WaterIn_OFF_testing(){
                            console.log('請關閉水龍頭進水')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            outerSolenoidWater('0')
                            console.log('outerSolenoidWater_OFF')
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="tank_Disinfect_ON_testing()">消毒/打菌 ON</button>
                    <script>
                        // 消毒電磁閥 ON<br><font color="#FF0000">水龍頭 ON</font>
                        function tank_Disinfect_ON_testing(){
                            tankSolenoidDisinfect('1')
                            console.log('tankSolenoidDisinfect_ON')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            console.log('請開啟水龍頭進水')
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="tank_Disinfect_OFF_testing()">消毒/打菌 OFF</button>
                    <script>
                        // <font color="#FF0000">水龍頭 OFF</font><br>消毒電磁閥 OFF
                        function tank_Disinfect_OFF_testing(){
                            console.log('請關閉水龍頭進水')

                            var time = new Date();
                            while ((new Date() - time) < 1000) { };

                            tankSolenoidDisinfect('0')
                            console.log('tankSolenoidDisinfect_OFF')
                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="tank_SensorPump_ON_testing()">感測器 pump 進水 ON</button>
                    <script>
                        // 桶內電磁閥 ON<br>pump ON
                        function tank_SensorPump_ON_testing(){
                            tankSolenoidWaterIn('1')
                            console.log('tankSolenoidWaterIn_ON')

                            var time = new Date();
                            while ((new Date() - time) < 2 * 1000) { };

                            tankPumpSensor('1')
                            console.log('tankPumpSensor_ON')

                        }
                    </script>
                </td>
                <td>
                    <button type="submit" class="btn btn-primary" onclick="tank_SensorPump_OFF_testing()">感測器 pump 進水 OFF</button>
                    <script>
                        // pump OFF<br>桶內電磁閥 OFF
                        function tank_SensorPump_OFF_testing(){
                            tankPumpSensor('0')
                            console.log('tankPumpSensor_OFF')

                            var time = new Date();
                            while ((new Date() - time) < 2 * 1000) { };

                            tankSolenoidWaterIn('0')
                            console.log('tankSolenoidWaterIn_OFF')

                        }
                    </script>
                </td>
            </tr>
        </table>

        <div id="coffee_footer">
            <!-- 匯入共同使用的 footer.html 內容 -->
            {% include 'footer.html' %}
        </div>
    </div>
    
</body>

</html>