刪除 'aisky-mqttd'

aisky-mqttd

@@ -1,263 +0,0 @@
-#!/usr/bin/env python3.5
-import paho.mqtt.client as mqtt
-import time
-import sys
-import http.client, urllib
-import json
-import threading
-import os
-import shutil
-import uuid
-import hashlib
-import serial
-import array
-import base64
-import urllib.request
-import datetime
-import requests
-import logging
-import RPi.GPIO as GPIO
-
-""" Device Information - the information about this device
-These device information is used for the MQTT topic. This program will subscribe and publish to
-the MQTT topic.
-MQTT topic to subscribe to: AISKY/<project_name>/<model_name>/<device_id>
-MQTT topic to publish to : AISKY/<project_name>/<model_name>/<device_id>/Log
-"""
-# @var project_name  The project name comes from the u-boot environment variable 'project'.
-# @var model_name    The model name comes from the u-boot environment variable 'model'.
-# @var device_id     The device id comes from the mac address of eth0.
-project_name = os.popen('cat /etc/aisky.conf | grep project').readline().split('=')[1].strip()
-model_name = os.popen('cat /etc/aisky.conf | grep model').readline().split('=')[1].strip()
-device_id = open('/sys/class/net/eth0/address').readline().strip()
-
-""" NOTE: Remember to setup the u-boot environment variables before executing this program. The
-commands to setup the u-boot environment variables are as follows.
-Setup the 'project' variable: The following command sets the 'project' variable to AppleFarm.
-    root@mylinkit:~# fw_setenv project AppleFarm
-Setup the 'model' variable: The following command sets the 'model' variable to MK-G.
-    root@mylinkit:~# fw_setenv model MK-G
-Then, the following command can be used to display the u-boot environment variables.
-    root@mylinkit:~# fw_printenv
-"""
-
-""" MQTT Server
-If you don't have your own MQTT server, you can use the public MQTT server 'iot.eclipse.org'. But
-with the public MQTT server, you can only publish and subscribe without a user name and password.
-Sometimes the public MQTT server is unstable.
-"""
-# @var mqtt_server  The URL or IP address of the MQTT server to connect to.
-# @var mqtt_port    The port of the MQTT server to connect to.
-# @var mqtt_alive   Maximum period in seconds allowed between communications with the broker. If
-#                   no other messages are being exchanged, this controls the rate at which the 
-#                   client will send ping messages to the broker.
-mqtt_server = "60.250.156.234"
-mqtt_port = 1883
-mqtt_alive = 60
-# camera API command
-
-#php path
-
-
-#reboot_path ="http://www.aisky.com.tw/field/status.php"
-
-#log
-
-# @var mqtt_sub_topic  The MQTT topic to subscribe to.
-# @var mqtt_pub_topic  The MQTT topic to publish to.
-mqtt_sub_topic = "AISKY/" + project_name + "/" + model_name + "/" + device_id
-mqtt_pub_topic = mqtt_sub_topic + "/Log"
-
-##nr
-nr = "AGV_BASE"
-
-##gpio
-
-GPIO.setmode(GPIO.BOARD)
-GPIO.setwarnings(False)
-GPIO.setup(11, GPIO.OUT, initial=GPIO.LOW)
-GPIO.setup(12, GPIO.OUT, initial=GPIO.LOW)
-
-##sonic
-
-trigger_pin = 22
-echo_pin = 24
-GPIO.setup(trigger_pin, GPIO.OUT, initial=GPIO.LOW)
-GPIO.setup(echo_pin, GPIO.IN)
-
-
-## Calculate the SHA256 checksum of the file.
-# @param file  [in] The file path for which you want to calculate the checksum.
-def get_sha256sum(file):
-    with open(file, "rb") as f:
-        bytes = f.read()
-        return hashlib.sha256(bytes).hexdigest()
-
-## Send logs to the server.
-# @param command   [in] The command received from the server.
-# @param response  [in] The response message to the command.
-def server_log(command, rqnn):
-    localtime = time.strftime("%Y-%m-%d %H:%M:%S", time.localtime())
-    # message to be sent in JSON format
-    payload = {
-        # let server know which device the message came from
-        'device_id': device_id,
-        # let server know when the message was sent from the device
-        'localtime': localtime,
-        'node_id': nr,
-        'command': command,
-        'rqnn': rqnn
-    }
-    jsonobj = json.dumps(payload, sort_keys=True, indent=4)
-    mqtt_client.publish(mqtt_pub_topic, jsonobj, qos=2)
-    print('Sent:')
-    print(jsonobj)
-
-def get_ip_address(ifname):
-    s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-    try:
-        return socket.inet_ntoa(fcntl.ioctl(
-            s.fileno(),
-            0x8915,  # SIOCGIFADDR
-            struct.pack('256s', ifname[:15])
-        )[20:24])
-    except:
-        return ""
-## Reset this device.
-def system_reboot():
-    server_log('a035', '1')
-    time.sleep(5)
-    os.system('sudo reboot')
-    time.sleep(10)
-
-def system_update_code():
-    os.system('sudo su')
-    os.system('rm -rf /home/pi/AGVBASE')
-    os.system('git clone -b AGVBASE --single-branch http://60.250.156.230:3000/allen/AGV.git /home/pi/AGVBASE')
-    time.sleep(3)
-    os.system('cp /home/pi/AGVBASE/aisky-mqttd /usr/sbin/')
-    time.sleep(1)
-    os.system('cp /home/pi/AGVBASE/udp_client.py /home/pi/')
-    time.sleep(1)
-    os.system('sudo chmod 777 /usr/sbin/aisky-mqttd')
-    os.system('sudo chmod 777 /home/pi/udp_client.py')
-    time.sleep(5)
-    server_log('a033', '1')
-    os.system('sudo reboot')
-    time.sleep(10)
-
-## Receive the system action  to this device .
-
-def charge(msg):
-    if  (msg['value'] == 'on'):
-        GPIO.output(11, GPIO.HIGH)
-        server_log('charge', "OPEN")
-    elif (msg['value'] == 'off'):
-        GPIO.output(11, GPIO.LOW)
-        server_log('charge', "CLOSE")
-    else:
-        server_log('charge', "NULL")
-
-def water_charge(msg):
-    if  (msg['value'] == 'on'):
-        GPIO.output(12, GPIO.HIGH)
-        server_log('water_charge', "OPEN")
-    elif (msg['value'] == 'off'):
-        GPIO.output(12, GPIO.LOW)
-        server_log('water_charge', "CLOSE")
-    else:
-        server_log('water_charge', "NULL")
-
-def send_trigger_pulse():
-    GPIO.output(trigger_pin, True)
-    time.sleep(0.001)
-    GPIO.output(trigger_pin, False)
-
-def wait_for_echo(value, timeout):
-    count = timeout
-    while GPIO.input(echo_pin) != value and count > 0:
-        count = count - 1
-
-def sonic():
-    send_trigger_pulse()
-    wait_for_echo(True, 5000)
-    start = time.time()
-    wait_for_echo(False, 5000)
-    finish = time.time()
-    pulse_len = finish - start
-    distance_cm = pulse_len * 340 *100 /2
-    distance_in = distance_cm / 2.5
-    print(distance_cm)
-    server_log('sonic',distance_cm)
-
-
-
-## The callback function for connecting.
-# @param client    [in] The client instance for this callback.
-# @param userdata  [in] The private user data as set in Client() or user_data_set().
-# @param flags     [in] Response flags sent by the broker.
-# @param rc        [in] The connection result.
-def on_connect(client, userdata, flags, rc):
-    # subscribe MQTT topic on connection
-    client.subscribe(mqtt_sub_topic, qos=2)
-    server_log('a035', '1')
-    #logging.info('system running')
-    #data = {'nr': nr, 'status': 'reboot'}
-    #data = urllib.parse.urlencode(data)
-    #data = data.encode('utf-8')
-    #req = urllib.request.Request(reboot_path, data)
-    #req.add_header('User-Agent', 'Magic Browser')
-    #resp = urllib.request.urlopen(req)
-    #respData = resp.read()
-    print("reboot check  ok")
-
-
-## The callback function for processing messages from the server.
-# @param client    [in] The client instance for this callback.
-# @param userdata  [in] The private user data as set in Client() or user_data_set().
-# @param msg       [in] An instance of MQTT message.
-def on_message(client, userdata, msg):
-    # print(msg.payload)
-    msg.payload = msg.payload.decode('utf-8')
-    jsonmsg = json.loads(msg.payload)
-    #print(jsonmsg)
-    print('Received:')
-    print(json.dumps(jsonmsg, sort_keys=True, indent=4, separators=(',', ':')))
-    # processing the command from the server
-    if (jsonmsg['command'] == 'a035'):
-        system_reboot()
-    elif (jsonmsg['command'] == 'a033'):
-        system_update_code()
-    elif (jsonmsg['command'] == 'vpn_connect'):
-        vpn_connect()
-    elif (jsonmsg['command'] == 'vpn_disconnect'):
-        vpn_disconnect()
-    elif (jsonmsg['command'] == 'charge'):
-        charge(jsonmsg)
-    elif (jsonmsg['command'] == 'water_charge'):
-        water_charge(jsonmsg)
-    elif (jsonmsg['command'] == 'sonic'):
-        sonic()
-    else:
-        server_log(jsonmsg['command'], 'ERROR: Unknown command')
-
-## A thread used to subscribe to and wait for messages from the server.
-def thread_job():
-    # create a MQTT client with a user name and password to subscribe to the messages
-    mqtt_thread_client = mqtt.Client()
-    mqtt_thread_client.on_connect = on_connect
-    mqtt_thread_client.on_message = on_message
-    mqtt_thread_client.username_pw_set(username='aisky-client', password='aiskyc')
-    mqtt_thread_client.connect(mqtt_server, mqtt_port, mqtt_alive)
-    mqtt_thread_client.loop_forever()
-
-# create a MQTT client with a user name and password to publish messages
-mqtt_client = mqtt.Client()
-mqtt_client.username_pw_set(username='aisky-client', password='aiskyc')
-mqtt_client.connect(mqtt_server, mqtt_port, mqtt_alive)
-
-# create a thread to subscribe to and wait for messages from the server
-mqtt_subscribe_thread = threading.Thread(target=thread_job)
-mqtt_subscribe_thread.start()
-
-mqtt_client.loop_forever()