CoffeeProject/app/main/CTO20220622/MDK-ARM/DebugConfig/SDIO_STM32F407VGTx.dbgconf

// File: STM32F405_415_407_417_427_437_429_439.dbgconf
// Version: 1.0.0
// Note: refer to STM32F405/415 STM32F407/417 STM32F427/437 STM32F429/439 reference manual (RM0090)
//       refer to STM32F40x STM32F41x datasheets
//       refer to STM32F42x STM32F43x datasheets

// <<< Use Configuration Wizard in Context Menu >>>

// <h> Debug MCU configuration register (DBGMCU_CR)
//   <o.2>  DBG_STANDBY              <i> Debug Standby Mode
//   <o.1>  DBG_STOP                 <i> Debug Stop Mode
//   <o.0>  DBG_SLEEP                <i> Debug Sleep Mode
// </h>
DbgMCU_CR = 0x00000007;

// <h> Debug MCU APB1 freeze register (DBGMCU_APB1_FZ)
//                                   <i> Reserved bits must be kept at reset value
//   <o.26> DBG_CAN2_STOP            <i> CAN2 stopped when core is halted
//   <o.25> DBG_CAN1_STOP            <i> CAN2 stopped when core is halted
//   <o.23> DBG_I2C3_SMBUS_TIMEOUT   <i> I2C3 SMBUS timeout mode stopped when core is halted
//   <o.22> DBG_I2C2_SMBUS_TIMEOUT   <i> I2C2 SMBUS timeout mode stopped when core is halted
//   <o.21> DBG_I2C1_SMBUS_TIMEOUT   <i> I2C1 SMBUS timeout mode stopped when core is halted
//   <o.12> DBG_IWDG_STOP            <i> Independent watchdog stopped when core is halted
//   <o.11> DBG_WWDG_STOP            <i> Window watchdog stopped when core is halted
//   <o.10> DBG_RTC_STOP             <i> RTC stopped when core is halted
//   <o.8>  DBG_TIM14_STOP           <i> TIM14 counter stopped when core is halted
//   <o.7>  DBG_TIM13_STOP           <i> TIM13 counter stopped when core is halted
//   <o.6>  DBG_TIM12_STOP           <i> TIM12 counter stopped when core is halted
//   <o.5>  DBG_TIM7_STOP            <i> TIM7 counter stopped when core is halted
//   <o.4>  DBG_TIM6_STOP            <i> TIM6 counter stopped when core is halted
//   <o.3>  DBG_TIM5_STOP            <i> TIM5 counter stopped when core is halted
//   <o.2>  DBG_TIM4_STOP            <i> TIM4 counter stopped when core is halted
//   <o.1>  DBG_TIM3_STOP            <i> TIM3 counter stopped when core is halted
//   <o.0>  DBG_TIM2_STOP            <i> TIM2 counter stopped when core is halted
// </h>
DbgMCU_APB1_Fz = 0x00000000;

// <h> Debug MCU APB2 freeze register (DBGMCU_APB2_FZ)
//                                   <i> Reserved bits must be kept at reset value
//   <o.18> DBG_TIM11_STOP           <i> TIM11 counter stopped when core is halted
//   <o.17> DBG_TIM10_STOP           <i> TIM10 counter stopped when core is halted
//   <o.16> DBG_TIM9_STOP            <i> TIM9 counter stopped when core is halted
//   <o.1>  DBG_TIM8_STOP            <i> TIM8 counter stopped when core is halted
//   <o.0>  DBG_TIM1_STOP            <i> TIM1 counter stopped when core is halted
// </h>
DbgMCU_APB2_Fz = 0x00000000;

// <<< end of configuration section >>>