import pymysql
import paho.mqtt.client as mqtt
import json
import threading
from time import sleep as sl
from datetime import datetime as dt
from concurrent.futures import ThreadPoolExecutor


class MQTT(object):
    # def __init__(self, username, password, ip, port, time, sub_topic):
    #     self.client = mqtt.Client()
    #     self.pool = ThreadPoolExecutor(10)
    #     self.username = username
    #     self.password = password
    #     self.ip = ip
    #     self.port = port
    #     self.time = time
    #     self.sub_topic = sub_topic
    #     self.D = {}
    #     for i in range(0, len(self.sub_topic)):
    #         self.D[self.sub_topic] = 0
    #     self.res = 0
    def __init__(self):
        self.res = 0
        # 當地端程式連線伺服器得到回應時，要做的動作
        def on_connect(client, userdata, flags, rc):
            # print("Waiting for MQTT message...")
            # 將訂閱主題寫在on_connet中
            # 如果我們失去連線或重新連線時
            # 地端程式將會重新訂閱
            # 判斷是否為元組，有多個訂閱主題
            # if isinstance(self.sub_topic, tuple):
            #     for i in range(0, len(self.sub_topic)):
            #         client.subscribe(self.sub_topic[i])
            # client.subscribe(self.sub_topic)
            client.subscribe('AISKY/Coffee/MK-G/b8:27:eb:7e:24:78/Log')

        # 當接收到從伺服器發送的訊息時要進行的動作
        def on_message(client, userdata, msg):
            msg = msg

            payload = json.loads(msg.payload.decode('utf-8'))
            self.res = payload
            print('self.res = payload :', payload)                                          # check! 11/16 從硬體發出這邊接收到的訊息
            # if payload:
            #     self.D[self.sub_topic] = 1
            #     self.res = payload

        self.client = mqtt.Client()
        # self.command = {'tank-number':'1', 'command':'tank_motor_status', 'value':'on'}
        self.command = {'tank-number':'', 'command':'coffee_mqtt_restart', 'value':''}

        def thread_job(self):
            # 設定連線設定動作
            self.client.on_connect = on_connect
            # 設定接收訊息的動作
            self.client.on_message = on_message
            # 設定登入帳號密碼
            self.client.username_pw_set("aisky-client", "aiskyc")
            # self.client.username_pw_set(self.username, self.password)
            # 設定連線資訊(IP, Port, 連線時間)
            self.client.connect("60.250.156.234", 1883, 60)
            # self.client.connect(self.ip, self.port, self.time)
            # 開始連線，執行設定的動作和處理重新連線問題
            # 也可以手動使用其他loop函式來進行連接
            self.client.loop_forever()

        mqtt_subscribe_thread = threading.Thread(target=thread_job, args=(self,))
        mqtt_subscribe_thread.daemon = True
        mqtt_subscribe_thread.start()
        # 睡1秒等執行敘跑完才跑主程式
        sl(1)
        # while True:
        #     pass

    def mqttPublish(self, topic, command):
        self.client.publish(topic, json.dumps(command))
        print('json.dumps(command):', json.dumps(command))
        # print('done')
        return True
        # while True:
        #     if self.D[self.sub_topic] == 1:
        #         return self.res


    # def workOn(self):
    #     self = self






    # def thread_job(self):
    #     # 設定連線的動作
    #     self.client.on_connect = on_connect
    #     # 設定接收訊息的動作
    #     self.client.on_message = on_message
    #     # 設定登入帳號密碼
    #     self.client.username_pw_set("aisky-client", "aiskyc")
    #     # self.client.username_pw_set(self.username, self.password)
    #     # 設定連線資訊(IP, Port, 連線時間)
    #     self.client.connect("60.250.156.234", 1883, 60)
    #     # self.client.connect(self.ip, self.port, self.time)
    #     # 開始連線，執行設定的動作和處理重新連線問題
    #     # 也可以手動使用其他loop函式來進行連接
    #     self.client.loop_forever()
    #
    #     mqtt_subscribe_thread = threading.Thread(target=thread_job, args=(self,))
    #     mqtt_subscribe_thread.daemon = True
    #     mqtt_subscribe_thread.start()
    #     # 睡1秒等執行敘跑完才跑主程式
    #     sl(1)
        # return "success"
        # self.queryMySQL()
        # self.cursor.close()
        # self.db.close()
        # self.pool.shutdown(wait=True)
        # self.mqttPublish('AISKY/Coffee/MK-G/b8:27:eb:7e:24:78', self.command)
        # while True:
        #     pass


if __name__ == '__main__':
    mqtt = MQTT()
    try:
        # mqtt.workOn()
        mqtt.mqttPublish('AISKY/Coffee/MK-G/b8:27:eb:7e:24:78', mqtt.command)
        print('mqttPublish_test')
        while True:
            pass
    except KeyboardInterrupt:
        mqtt.pool.shutdown(wait=True)
        mqtt.cursor.close()
        mqtt.db.close()